Jump to content
SAU Community

Recommended Posts

To do it properly you'll need to remove the whole roof lining from the car (not just the soft lining, the whole thing), You can do it in the car but may not be as succesful as it keeps trying to droop down while you're trying to stick it back up.

Peel back the section that is coming loose (if you just want to fix that section), spray with contact adhesive (from Bunnings, Supercheap, etc) on BOTH the soft roof lining and the backing panel (not too much that it soaks through), leave until it's tacky both sides then pull the soft lining back over where it needs to go (holding it up over the top, not letting it touch yet) then progressively press the two sections together working towards the outside. It's hard to explain so hopefully that makes sense!

To do it properly you'll need to remove the whole roof lining from the car (not just the soft lining, the whole thing), You can do it in the car but may not be as succesful as it keeps trying to droop down while you're trying to stick it back up.

Peel back the section that is coming loose (if you just want to fix that section), spray with contact adhesive (from Bunnings, Supercheap, etc) on BOTH the soft roof lining and the backing panel (not too much that it soaks through), leave until it's tacky both sides then pull the soft lining back over where it needs to go (holding it up over the top, not letting it touch yet) then progressively press the two sections together working towards the outside. It's hard to explain so hopefully that makes sense!

Dont use contact adhesive it soaks thru and gets clumpy , smells like hell for a while

Use Whorth headliner spray glue from autopaint shop , most others fail in the heat , or 3m super trim adheasive #90

Spotlight sells microfiber suede recover it , much nicer in black suede

To remove lay the seats down and roll down the windows to have room to slide it out easy

Its fragile so becareful

And remove the saggy cloth it you recover it so its smoothe or glue it down first

Edited by Carbon 34

mine is doing this a little too...but its not the liner peeling off the backing. its the whole backing falling off the roof, just replace the old double sided tape that used to hold it up there.

double check that yours isnt the same before you go buying expensive spray glues etc.

mine is doing this a little too...but its not the liner peeling off the backing. its the whole backing falling off the roof, just replace the old double sided tape that used to hold it up there.

double check that yours isnt the same before you go buying expensive spray glues etc.

pretty sure mines like that, i was gonna double sided tape it jsut havent been bothered... might do it befreo it gets worse though

mine is doing this a little too...but its not the liner peeling off the backing. its the whole backing falling off the roof, just replace the old double sided tape that used to hold it up there.

double check that yours isnt the same before you go buying expensive spray glues etc.

Mines doing the exact same thing, any recommendations on double sided tape to use? 3M I assume.

I remember being impressed by 3M as a company after studying a case study about them in uni, so personally I trust them as a company to provide quality products and would choose them among others. Very good R&D

sorry mate not mean to be rude/highjack your topic,where i can buy double sided tape and what brand? mine peeling off too...thanks guys.

Bunnings sells cheap white stuff

Autopaint store sells the 3m green semi strong removable

Or red backed non removable without force or remover soaked rag

Red is what car emblems and side trim is held on with

  • 1 month later...

Most auto stores should sell a spray adhesive for roof linings. Our go to your local hardware shop and buy a can of spray contact adhesive. Will cost less than $20 (i bought some today for a different use). Generally though you will need a new roof lining, because it is the foam becoming brittle that is causing the lining to sag.

Sorry, should have been more specific. The lining is fine, the drooping is where the headliner board (ie the mdf or whatever it is) attaches to the metal roof of the car. There are 3 or 4 contact points at the rear windscreen for this. I need to take another look, but I'm guessing there are Velcro pads or similar that are no longer glued on. New Velcro on loctite 401 could do the trick, spray adhesive sounds more like for the fabric. Just thought there may be a specific hi-temp rated interior glue.

  • 10 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...