Jump to content
SAU Community

Recommended Posts

How can i make my window rubber surrounds black again? They're chalky and look shit.

I've tried 4 coats of back to black and it lasted a few months but I'm after something that will be glossy and last. You detailers must know of something ;)

to rejuvinate it needs constant reapplication for an extended period...so every 2 weeks for 6 months for eg, it should start looking better...Otherwise you are only masking it really, think of it like putting a coat of paint on rusty metal.

Wether you use a cheap or expensive product , you will find applying a little product often will work better in the long term than applying alot all at once..

back to black is a reasonable product it may just be your application is wrong..

Alot of people like aerospace 303, personally I find Mequirs rubber gel works good too for a cheap product, ..its purple and it smells like bubblegum..:D..I'll apply it every six months or so and my rubbers all still look great..

something else that works is leather conditioner, it has alot of oils in it that seem to soak into rubber well..

otherwise get in contact with waxit Im sure he will have something for rejuvenation of old rubber

I'd recommend Cquartz Dlux. Not cheap but it lasts.

Here's a good review.

http://www.autogeekonline.net/forum/product-reviews/52351-carpro-cquartz-dlux-review.html

Thank you :) I actually read the same thread a few years ago but could never find it in australia. just found it on waxit.

to rejuvinate it needs constant reapplication for an extended period...so every 2 weeks for 6 months for eg, it should start looking better...Otherwise you are only masking it really, think of it like putting a coat of paint on rusty metal.

Wether you use a cheap or expensive product , you will find applying a little product often will work better in the long term than applying alot all at once..

back to black is a reasonable product it may just be your application is wrong..

Alot of people like aerospace 303, personally I find Mequirs rubber gel works good too for a cheap product, ..its purple and it smells like bubblegum.. :D..I'll apply it every six months or so and my rubbers all still look great..

something else that works is leather conditioner, it has alot of oils in it that seem to soak into rubber well..

otherwise get in contact with waxit Im sure he will have something for rejuvenation of old rubber

That was exactly my intention, to mask it. The last time i looked at these products i could not find anything to get rid of the chalky stains. I just found duragloss 481 on carcareproducts, they seem confident about their product. Now that I can get rid of the chalky stains I can get something that will restore shine and protect :)

I will give the rubbers a hit with duragloss 481 then use cquartz dlux.

Thank you for your help you two :)

I just bought this Turtle Wax black tinted acrylic trim coating, looks pretty interesting. Normally not a fan of Turtle Wax products but they have been bringing out some good stuff lately, especially the towels and applicators

https://www.turtlewax.com/shop/products/turtle-wax-jet-black-black-endura-shine-trim-coating

Edited by junkie

i used to get that kind of result from the original version of meguiars nxt wax, the gloss, flake pop and swirl filling were incredible. too bad it would last a week max. current nxt 2.0 is pretty average unfortunately, does last longer but nothing special otherwise

I tried this new synthetic paint sealant. Wolfgang deep gloss.

20140622_132626_zpsc229fc15.jpg

DSCN1648_zps39e9aecc.jpg

i just thought this was an interesting comparison...its coated in AMMO sealant, 2 coats and 1 of ammo creme...It doesnt do alot for the flek and colour contrast as you can see, yours has darker blacks and the purple has more pop though lighting and camera type is probably playing a part too< im assuming yours is a phone picture that usually have higher built in contrast settings.....I really wanted to use Polishangels coatings like this purple Audi, the wetness is amazing..

https://www.facebook.com/photo.php?v=281360095379185&set=vb.279199828928545&type=2&theater

but time and budget restraints meant i used what I had here....have been using the ammo system on my cressida for the last year almost, its definately holding up ok and comes up like new after every wash..but it does tend to flatten colours and metallics a bit...I still find california gold wax to give a richer shine than the ammo, but has nowhere near as good protection.....will be recoating the cres with Polishangel glasscoat next time and probably a layer of Blue xilion to try get some more colour into it...Its just looking a bit bland for my liking...

my next test will be chemical guys blacklight and hybrid v7, bought both but been too lazy to actually use them. meant to produce a pretty awesome result. the next item on my to buy list is naviwax ioncoat. not produced anymore but can still be found online

Yep that was a phone pic. Its amazing how different sealants bring out different colours on MNP cars. Both look nice and wet.

My phone seems to capture it well. I havent had a wax/sealant that makes it this purple. And I must say I like it.

20140625_111818_zpsaghlaxrs.jpg

  • Like 2

You've just 10 fold increased my MNP boner Hadouken, that looks incredible! More pics plx :)

Has anyone tried 'Meguiar's M66 Quick Detailer Polish', I've scored about 3l worth and providing weather holds out this weekend might give it a run.

  • 2 weeks later...

Another weekend, another black R34...

started here...yes the wholoe car was like this :/

DSCN1870_zpsc40a9e26.jpg

fg500 and some yellow pad got it here

DSCN1874_zpsb47bb1ea.jpg

FF4000 and a blue scholl pad got it here

DSCN1875_zps15a8c26e.jpg

Quick coat of sealer and carnuba got it done...

DSCN1883_zpsb7901669.jpg

  • Like 1
  • 2 weeks later...

Fresh paint:

Sand 1500, polish 5 or 6 times, wash, Lime prime light, Dodo hard candy, Dodo rainforest rub, Autoglym extra gloss protection. Some "black wow" on the old grey rubbers came up well.

post-89755-0-48498900-1406167412_thumb.jpg post-89755-0-81240300-1406167508_thumb.jpg post-89755-0-22823300-1406167644_thumb.jpg

post-89755-0-78672900-1406167702_thumb.jpg post-89755-0-40014000-1406167835_thumb.jpg post-89755-0-80689000-1406167917_thumb.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...