Jump to content
SAU Community

Recommended Posts

Hey guys I am located on the Gold Coast, willing to post items at cost or pick up and currently have the following for sale;

(Prices Negotiable)

R32 GTR Passenger seat Immaculate condition, with rail, all movements working perfectly $280

Also have a std R32 Gtst drivers seat laying around in good condition for $40,

post-44496-0-62648700-1354438851_thumb.jpgpost-44496-0-44898000-1354439489_thumb.jpg

polished dished Work Equips 18"x10+28 fronts, 18"x11.5+24 rears $2200 (tyres very poor)

post-44496-0-11981500-1354438815_thumb.jpgpost-44496-0-12466200-1354438830_thumb.jpgpost-44496-0-65374500-1354438835_thumb.jpgpost-44496-0-78718400-1354438841_thumb.jpg

HKS Super dragger 3.5" exhaust cat back to suit R32 chassis and twin front pipe to suit rb26dett will separate or $500ono the lot excellent condition polished cannon 5"

post-44496-0-22288700-1354438863_thumb.jpg

Momo steering wheel in perfect condition, also have an immaculate genuine horn button to fit. Steer wheel $130, Button $20 post-44496-0-95102800-1354439884_thumb.jpgpost-44496-0-94130200-1354439892_thumb.jpg

Pwr FC hand controller $300 late model pwr fc

post-44496-0-90431500-1354439852_thumb.jpg

R32 drivers door control switch board perfect condition $50

post-44496-0-85810700-1354438876_thumb.jpg

R32 GTR front left driveshaft perfect condition, good cond boots $100, also have transfer shaft from gearbox to front diff and tailshaft $100

post-44496-0-05227300-1354438291_thumb.jpg

Rb26 starter motor $60

post-44496-0-41713500-1354439327_thumb.jpg

HKS 2530's $2000 pair turbos only, done 2000kms also have oil drains, lines, std dump and manifolds etc enquire for price

post-44496-0-29139600-1354439251_thumb.jpgpost-44496-0-88160400-1354439268_thumb.jpgpost-44496-0-00615300-1354439288_thumb.jpgpost-44496-0-46621000-1354439293_thumb.jpgpost-44496-0-82637500-1354439300_thumb.jpg

Tein Coilovers to suit R32 GTR and GTS4 $750 very good condition no leaks, heavy spring rates of I think 12kg and 10 kg height adjustable go very low, and damper adjustable, have genuine spanners to suit

post-44496-0-87689600-1358738950_thumb.jpgpost-44496-0-95886400-1358739017_thumb.jpgpost-44496-0-64021400-1358739042_thumb.jpgpost-44496-0-88991600-1358739068_thumb.jpg

R32 Japanese Fibreglass front vented guards good condition $250 with mesh in vents (not cheap local made, these are durable jap guards)

post-44496-0-66397900-1354439708_thumb.jpg

SKYLINE door skirt trims great cond.$50pair

post-44496-0-01475000-1358737465_thumb.jpg

R32 skyline floor mats genuine original $60

post-44496-0-87367700-1358737514_thumb.jpg

RB26 Coil Pack loom excellent condition $100

post-44496-0-26286200-1358737486_thumb.jpg

D1 SPEC racing lightweight nuts in blue x 20 $30

post-44496-0-26328800-1358737537_thumb.jpg

Bolt on fenders 1 pair fronts and one pair rears are roughly 30mm guards with rubber trim and polished capped nuts $120

post-44496-0-18758900-1354439917_thumb.pngpost-44496-0-33412100-1358737703_thumb.jpg

R32 windscreen trim plastic piece great condition $30

post-44496-0-18085500-1358737853_thumb.jpg

R32 clutch master cylinder clean and perfect working condition $60

post-44496-0-41820000-1358737927_thumb.jpg

R32 handbrake complete, good cond. leather $60

post-44496-0-67781800-1358737972_thumb.jpg

R32 abs model master cylinder, clean great working condition $80

post-44496-0-27175100-1358738016_thumb.jpg

R32 GTR (also fit gts4) ABS module excellent condition no leaks $300

post-44496-0-83153900-1358738052_thumb.jpg

R32 'A' Pillar Trims, left and right side, excellent condition have all clips $30ea

post-44496-0-33873900-1358738137_thumb.jpg

R32 m spec fog lights (can make to suit anything) excellent condition $50

post-44496-0-00212300-1358738199_thumb.jpg

R32 Tail lights $100 pair

post-44496-0-32988000-1358738260_thumb.jpg

Bosch 023 fuel pump custom fitted to R32 fuel pump cradle and sender complete unit $140

post-44496-0-12611500-1358738291_thumb.jpg

R32 boot lid and genuine N1 lip, professionally painted and wing holes filled in $300

post-44496-0-59806100-1358738403_thumb.jpgpost-44496-0-73814400-1358741589_thumb.jpg

R32 gtst front brake rotors, pads and vented slotted discs, excellent condition pads and discs only used for 10000km $250 pair front left and right

post-44496-0-84369900-1358738428_thumb.jpg

R32 GTR front hubs and wishbone complete left and right side, $100ea

post-44496-0-35382600-1358738540_thumb.jpg

R32 gtr (will also fit gts4) gearbox crossmember $40

post-44496-0-46821700-1358738593_thumb.jpg

R32 horn and bonnet catch support $50

post-44496-0-76287700-1358738672_thumb.jpg

R32 gtr rear seatbelts pair, great cond. $60

post-44496-0-49299900-1358738691_thumb.jpg

R32 front strut brace has had part machined out to clear crossover pipe on rb20/25 $30

post-44496-0-29697200-1358738715_thumb.jpgpost-44496-0-64309700-1358738773_thumb.jpg

R32 GTR front transfer shaft, gearbox to front diff, great cond. $80

post-44496-0-37990100-1358738790_thumb.jpg

apexi turbo timer perfect working condition $20

post-44496-0-99591300-1358738880_thumb.jpg

R32 dash surround $30

post-44496-0-57797900-1358739177_thumb.jpg

Rb26 engine loom good condition from r32 late model $150

post-44496-0-29020300-1358739404_thumb.jpg

Names Johnny I would rather you call or txt, otherwise please PM, thanks

0414596256

Edited by slidinr32gtr
  • 2 weeks later...

Hey mate txted you about the door sill/ kick plates but you didnt reply are this still for sale if yes id like them thanks :)

  • 4 weeks later...
  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...