Jump to content
SAU Community

Recommended Posts

Hey fellow stagea owners

Bought my first stagea today S1 C34 RS4 Dayz

I didn't notice till I went to the shops but I think I know what the problem is but I need some other advice

Problem: if I turn the steering wheel and I start reversing or going forward slowing the car feels like its struggle almost like a shutter but not to noticeable. I opened the bonnet and found that the powersteering fluid is low the fluid was hot and the fluid was only reaching the bottom of the dip stick thing on the cap....could low powersteering fluid do this as steering the car is easy and not hard to turn????

It's more like the car is going to konk out its hard to describe it....it's so wierd because it only happens when I'm slowly reversing or turning very slowly with near to non acceleration....

Edited by sleek3

Can't really get a video...just weird as...has heaps of power still and it's something u have to feel...what do u mean if the 4wd is switched on? Just wierd because besides that the car drives like a dream with no leaks or anything....

Edited by sleek3

There is a switch on the console that locks the 4wd on which can feel exactly like that at low speed, when it is turned on there is also a light on the dash.

Power steering fluid is a possible problem because very low fluid would cause additional load. It should definately be topped up. Stay on the lookout for a leak though, powersteering fluid should never disappear.

Well it didn't fix the problem after all lol....I just test it at a car park...it only does it in reverse when turning hmmm can't figure it no problems going foward...doesn't have a problem reversing just like its about to cut out but the revs are still at like 750....

Your not alone, unfortunately that doesn't mean i can help. I have a similar problem, only reversing into carparks, mine is only sometimes, and tends to be mostly when i have full right hand lock, once you go forwards again it goes away. for reference my power steering fluid is fine. never have been able to find a reason for it

random idea.....

had similar in my 33 with auto. and i think stageas are auto yea?

if so check gearbox oil. mine was a little low and it caused major issues. topped up and its fine.

Well I actually decided to take 10 minutes to actually test mine and watch it my revs actually drop when turning the steering wheel so not to concerned now my idle is at 750 and drops low as when turning the wheel in gear and rolling....but doesn't die

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...