Jump to content
SAU Community

Recommended Posts

I'm curious to know with these cars which things can make a vast or not so vast improvement in the way of handling and balance, that doesnt cost a couple week's paycheck.

I'll try and list all the things it currently has upgraded..

18X9 +23 all round

235/40 Kumho KU31 front

265/35 Federal RSR rear

Front strut brace

BC BR Coilovers (8 and 6kg)

27mm whiteline front swaybar

Nismo castor arms

Shimmed diff (Pretty much locked)

Aftermarket rear lower control arms

HICAS lock bar

Aluminium subframe bushes

Relocate spare wheel and jack to shed

I'm thinking maybe a bit more neg camber on the front could help, but what do i know, lol.

Can any of the guru's out there recommend some things worth upgrading (that are good bang for buck) that might get this barge of a car faster lap times?

Thanks.

Tyres mate.

There are a whole heap of things on there that make much less difference than a good set of tyres. ANd doing track work, or even worse making setup changes, with road tyres on the track is just chasing a problem that may not exist.

There are a brilliant handling car out of the box (tyring tracking something else like a commodore or wrx that is pretty standard and you will feel the difference!)

The setup I used on my GTST (1.10s at Wakefield park) were:

bleed valve, 12psi boost, 160rwkw

lower springs

tight mechancial diff

whiteline sway bars

235 front 265 rear semi slicks

If you are on a budget (like most people), try Federal FZ201 tyres, they are great in the dry and very cheap. Otherwise I'd go Kumho V70a, or maybe Toyo 888 (but skylines can be a ltitle heavy). If you want the best at any price go for Dunlop Dz03, Yoko A050 or the Hankooks, but be ready to pay $500+ per tyre.

BTW you can get second hand slicks or semi slicks but they are a real gamble on quality...generally they are cheap because they are past their best, but sometimes there are bargains

I would have thought that a 265 is a bit too wide on a 9" rim, and 235 is a bit narrow.

Also, try a heavier rear bar. Run higher air pressure in the front tyres.

Are the coilovers adjustable for ride height? If so, have you had the car corner weighted?

On a different tack, upgrade the brakes to use braided lines, fit some good pads and slotted rotors (if you haven't already).

Agreed, I'm thinking that as well, pretty hefty front is there is nothing in the rear.

And in terms of handling/balance - what are the issues you are currently having? It's too taily happy? Front understeer or doesn't respond too well?

Also agree RE: Tyres. KU31's are terrible... I have them on the front of my Commodore lol, I wouldn't put them on a car that I actually wanted to handle properly.

If you complimented the front with RS-Rs to match the rear you'd notice a major improvement there for sure.

There is also the cheap Achillies semi on the market at the moment that is around $200 a tyre in a 265/18 - They are starting to get a reasonable reputation for the people on a tight budget.

I couldn't out drive my KU36's at the track the other day but for the money I'm going to try Achillies next time. Seem too be pretty good.

As the other guys have said, I'd be changing to some better tyres 1st and then looking at maybe a bigger rear sway bar?

Woops I meant KU36's on the front.

Tyres mate.

There are a whole heap of things on there that make much less difference than a good set of tyres. ANd doing track work, or even worse making setup changes, with road tyres on the track is just chasing a problem that may not exist.

There are a brilliant handling car out of the box (tyring tracking something else like a commodore or wrx that is pretty standard and you will feel the difference!)

The setup I used on my GTST (1.10s at Wakefield park) were:

bleed valve, 12psi boost, 160rwkw

lower springs

tight mechancial diff

whiteline sway bars

235 front 265 rear semi slicks

If you are on a budget (like most people), try Federal FZ201 tyres, they are great in the dry and very cheap. Otherwise I'd go Kumho V70a, or maybe Toyo 888 (but skylines can be a ltitle heavy). If you want the best at any price go for Dunlop Dz03, Yoko A050 or the Hankooks, but be ready to pay $500+ per tyre.

BTW you can get second hand slicks or semi slicks but they are a real gamble on quality...generally they are cheap because they are past their best, but sometimes there are bargains

Thanks for that. When funds permit i shall be on the lookout for some proper semi's, though maybe not the Dunlops or Yoko's, those prices just scare me, lol.

I would have thought that a 265 is a bit too wide on a 9" rim, and 235 is a bit narrow.

Also, try a heavier rear bar. Run higher air pressure in the front tyres.

Are the coilovers adjustable for ride height? If so, have you had the car corner weighted?

On a different tack, upgrade the brakes to use braided lines, fit some good pads and slotted rotors (if you haven't already).

I think so too, a 245 front and 255 would be ideal for me.

What sort of air pressures are best? Or is it a case of dialing it in for each car.

Yep, height/damper and springs are adjustable, havent had it corner weighted (only found out about that last night actually).

Waiting to be installed are some front slotted DBA rotors with PMU HC+ pads, and fresh rear standard rotors with PMU B-spec pads. Aswell as some braided brake lines and RBF660 fluid.

27mm front bar with no rear upgrade should make it it bit "interesting" to drive.

I think i read somewhere that with a GTS-t, to upgrade the front swaybar and leave the rear, apparently inducing understeer.

There was a Whiteline swaybar group-buy at the time, lol.

Agreed, I'm thinking that as well, pretty hefty front is there is nothing in the rear.

And in terms of handling/balance - what are the issues you are currently having? It's too taily happy? Front understeer or doesn't respond too well?

Also agree RE: Tyres. KU31's are terrible... I have them on the front of my Commodore lol, I wouldn't put them on a car that I actually wanted to handle properly.

If you complimented the front with RS-Rs to match the rear you'd notice a major improvement there for sure.

There is also the cheap Achillies semi on the market at the moment that is around $200 a tyre in a 265/18 - They are starting to get a reasonable reputation for the people on a tight budget.

Not exactly getting any dramas with the car. I probably wasnt pushing it hard enough at the track day i went to (had some Achillies ATR sport tyres on at the time and was getting brake fade). So wasnt super confident + being my first time on Barbagello at night time.

That is the Achillies 123 tyre is it? I also heard they are good, that they just dont last as long as the others.

I think i read somewhere that with a GTS-t, to upgrade the front swaybar and leave the rear, apparently inducing understeer.

There was a Whiteline swaybar group-buy at the time, lol.

Yuh. More roll stiffness at the front moves the grip to the rear. If you like it safe, then understeer is the safest characteristic to build into a car's handling. But I hate understeer. Hate it hate it hate it. If I have to leave the road, I'm happier doing so facing backwards. Less chance of a neck injury. /jokes.

But anyway, it's not sensible to put a massively stiff front bar on (like your 27mm) without upgrading the rear too. You'd want at least the 24m adjustable on the rear to balance that stiff front bar.

Yep, with 8kg front/6kg rear you'd want a 22 adjustable to match the 27mm fixed. Will make a massive difference to handling.

You'll want the adjustable version to fine tune the balance.

What rims are those? I'm interested as 9" +23 sounds like a good fitment. I'm surprised that 265/35 fit with +23.

Edited by simpletool

Yep, with 8kg front/6kg rear you'd want a 22 adjustable to match the 27mm fixed. Will make a massive difference to handling.

You'll want the adjustable version to fine tune the balance.

+1 adjustable rear sway bar is definitely the first thing to do. Second would be front tyres, unless they've got some meat on them and you want to get some value out of them. KU36s should be ok, but not as grippy as RSRs.

Yep, with 8kg front/6kg rear you'd want a 22 adjustable to match the 27mm fixed. Will make a massive difference to handling.

You'll want the adjustable version to fine tune the balance.

What rims are those? I'm interested as 9" +23 sounds like a good fitment. I'm surprised that 265/35 fit with +23.

Looks like a rear swaybar is on the list then :) They are blitz type 01 and yes, perfect fitment if you ask me. I was worried aswell about the 265. Wouldnt want anything wider but it even with minimal camber they dont touch anything.

Got any pics of fitment?

and +1 to better front tyres. It's good to use the same tyres all around.

BTW. I chose the 22mm adjustable rear based on % increase over stock. It should be right, and you can adjust to equivalent of 21, 22, 23mm (approximately).

  • 1 month later...

Over the last few years we've taken an essentially stock R33 GTST to Winton and gradually upgraded it, noting the laptime benefits of each upgrade.

We reduced the weight significantly, (probably around 200kgs removed), ran the same boost pressure and stock brake system during this period. We also installed a VideoVBOX system to properly understand what was happening.

Whilst this car had previously had Tein Street Springs installed it still had some pretty rubbish standard shocks. So no coil-overs...

Biggest 'feel' benefit was a proper fixed back race seat. Not a lot of lap time here, but major gains to help learn what the car was doing.

Sway bars: -2.1" per lap

Whiteline Blade Adjustable, as most people attest, gave a massive laptime improvement on the same rubber.

Brake reconditioning: -2.8" per lap

Still the stock brake rotors, re-machined, Ferodo pads, Dot 5 fluid and new seals all-round.

Semi-Slicks (Toyo R888's) -5.58" per lap

We also shimmed up the diff a little before bolting these tyres on so it's difficult to tell how much of which was of benefit, but I can tell you the diff shims were very cheap and the tyres, not so much!

There's a million other little upgrades on there, like a HICAS lockbar and undertray, rear wing, but there's no way for us to directly prove the benefits using the data... and asides from the lockbar they aren't 'suspension' related.

We will have BC ER Coilovers on soon, but also a completely new RB30DET good for well over 500bhp and a roll cage, so it won't be a fair comparison. But I hope this helps.

Some more details on the project including on-boards etc here:

http://droppingthehammer.wordpress.com/

Best of luck, hope to see you there soon.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...