Jump to content
SAU Community

Recommended Posts

as title states im up for a new turbo on my rb20 :( im currently running a rb25 s2 turbo nylon front wheel and i hate it! i need a turbo that will bolt to factory manifold and dump flanges, i was looking at a kingunawa turbo are they alright? and im chasing a responsive setup cause i do alot of sneeky streeting ;) any help would be appreciated :) im running full fmic 14psi walbro 225 pump standard injectors on a nis tune ecu :)

Link to comment
https://www.sau.com.au/forums/topic/420559-turbo-for-rb20/
Share on other sites

ahahah sneaky ;) and rb25 just not enough power runs out of puff after 12psi im going to put a fpr reg on the help the fueling out a little i might see if the hypergear hi flow ones are any good, my rb25 one is getting shaft play i need something stronger with a bit more punch im not running a bov so anything non ball bearing hates life ahah sudgestions?

Link to comment
https://www.sau.com.au/forums/topic/420559-turbo-for-rb20/#findComment-6764991
Share on other sites

If you aren't going to upgrade injectors and can't afford to then it is basically a waste of money doing much to try and make it make more power. Odds are you will end up with more lag and barely any power difference, so ultimately a slower less fun car. Not running a BOV is going to kill any turbo you put on there eventually

Link to comment
https://www.sau.com.au/forums/topic/420559-turbo-for-rb20/#findComment-6765021
Share on other sites

its just how i have my setup i run no bov and a blow through maf setup, running no bov will destroy shitty turbo's i know alot of people running presicion ect with no bov no problems! it all comes down to how much boost your running im only planning on 16psi max! but we'll forget that, thats not the issure, i will be upgrading injectors i just need to find the right set for my setup and sudgestions on injectors will be appreciated :)

Link to comment
https://www.sau.com.au/forums/topic/420559-turbo-for-rb20/#findComment-6765056
Share on other sites

I disagree not running a bob will kill your turbo. I've spoken to a lot of big name shops in Melbourne that have said it will not damage your turbo. Each to there own though I guess. Upgrade your injectors afm meter and but a hks 2530 or 2535. Or one of staos hypergear turbos. I have a hks 2535 spare with dump and oil water lines here spare for $1100 if your interested.

Link to comment
https://www.sau.com.au/forums/topic/420559-turbo-for-rb20/#findComment-6765198
Share on other sites

Thread closed. Believe it or not, but since SAU started more than 7 years ago, this topic has been discussed before.

Please use the search function in future. It may be found here:

http://www.skylinesaustralia.com/forums/index.php?app=core&module=search&search_in=forums

While we understand that it can be frustrating to have your thread closed - Please consider that other members may feel it to be disrespectful and selfish of you to post a simple question, without using the search feature to review the wealth of information provided by said members over the years.

If you still feel that this action is unjust, then please PM me and we can discuss it further.

Link to comment
https://www.sau.com.au/forums/topic/420559-turbo-for-rb20/#findComment-6765211
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...