Jump to content
SAU Community

Recommended Posts

Tried the heatbag while stretching for warm up last night, it made a noticeable difference in comfort, I used it again before bed and don't feel too bad today.

I'm going to stretch/heat bag daily and see what affect that has before seeing an Osteo.

Mixed it up a bit last night as I'm not as worried about my back being an actual injury from gym. This is the order, 2min breaks between sets.

Squat: 53kg - Success (ankle protesting a bit and has been a bit swollen of late as I've been up a lot doing things at home with the new arrival).

Bench: 91.5kg - Failed 8th rep of 3rd set, got close, couple of inches off the hooks.

SLDL: 53kg - Success

Rows: 53kg - Success

Curls: 43KG Failed 8th rep of 3rd set.

Bench(Spa) dips: Managed to get 8.5kg of weights into my pockets lol - Success 3x 30reps and slowing them down so they are harder.

Dumbell Lunges: 16kg total in hand - Success

Lateral Raises: 4.5kg each hand (I do 4 out to the front and 4 out to the side in each set and 3 sets) Success but starting to feel it towards the very end.

Did a set of 10 slow narrow hand position pushups (on my fists), no problems.

Did a 30sec side plank each side just for the sake of it, Success but tiring by that point. I honestly do not think my back issue is a core strength problem.

No big DOMS issues today but tomorrow is more so when I'd feel it.

All in all happy with that given I increased the weight on everything in one session, even if only by a small amount.

I miscalculated, the new weight is actually a touch over 52kg, not 53.

Anyway, managed to succeed at everything tonight, but took a 2.5min break before the last set of bench and curls to ensure I got them out.

also my ankle is giving me a bit of a twinge up the inside at this weight so I will take it slowly despite being able to get the reps out without too much leg drama.

Also managed to stuff 10kg in my pockets for bench dips.

Just choosing a bench and then I'll order my rack :)

Edited by ActionDan

Still undecided on a bench =\

Can't seem to find a middle of the range one.

As for exercise, completed everything except the curls but went straight 2min breaks instead of having the last set be a 2:30 break for the bench and curls. Got there with bench, not with curls.

Feel like a lot of exercises could take more weight, especially squats and rows but taking it slowly for the ankle.

Getting a rack will help but I need a new bench first...

From the main thread.

Rack, bench, new bar, and foam roller ordered and paid for.

Also had a promising session with the physio today, that is, I was handed over to the resident SIJ expert.

She did say something I thought was interesting too, she'd rather see me only squat half way but with my feet pointing ahead "properly" than have an angled foot position and go lower.

Thoughts?

She said she is very confident she can "smash" my ankle to get better ROM and wants me to start working on what she calls "inner core" strength and had me doing this weird "tuck your tummy in" exercise but without tensing abs or obliques, she thinks my inner core is shot from being laid up for so long and said I need to learn to reactivate it which is what's giving me grief.

She said fitter/active people can muscle their way through weakness like that by recruiting other muscles which is what she thinks I'm doing.

She also jammed her fingers into spots in my hips to test for some reaction which apparently was shit and was very uncomfortable.

Cheers, stoked to have finally gotten around to doing it.

Aside from the safety factor, I may even look to ditch curls all together now that I'll have a chin up bar.

Completed everything last night without issue, looking forward to getting the rack so I can get some more weight into some things. Managed to cram 11.5kg into my pockets for bench dips lol

Had a go with the roller last night after looking at some clips on how to target the SIJ, it does target them but I can't say I feel any different today, I'm going to have another go shortly as my back is a bit sore/stiff with some referred discomfort down the back of my left leg.

I think I have the muscle worked out that the physio wanted me to learn to activate again and have been trying to do so while exercising, definitely a different core stabilising feeling.

Built my bench this morning, pretty happy with it. I'll take some glory photos when the rack is here with all my new gear.

The missus informs me my rack arrived this morning, she didn't make the door in time (shower) so they left the 2m tall however heavy box on the door step lol

She said she took it through to the gym room piece by piece to get it off the door step.

Also played with the roller a bit more, not sure I think it helps all that much though it is uncomfortable.

Heat seems to be the best thing for it. Stretching and rolling only give limited relief.

Physio again tomorrow, we'll see if I've learned to activate the muscle she wanted me too.

The missus informs me my rack arrived this morning, she didn't make the door in time (shower) so they left the 2m tall however heavy box on the door step lol

She said she took it through to the gym room piece by piece to get it off the door step.

Also played with the roller a bit more, not sure I think it helps all that much though it is uncomfortable.

Heat seems to be the best thing for it. Stretching and rolling only give limited relief.

Physio again tomorrow, we'll see if I've learned to activate the muscle she wanted me too.

It's all about getting blood flow into the muscles. heat helps, as does massage.

Hah, actually, since the arrival of the baby the missus does have a new and splendid rack... but no pics for you.

Yeah I stretch, use heat, foam roller etc and it all "helps" but I am looking forward to it being solved.

Edited by ActionDan

Short on time tonight so reduced breaks between sets and still competed everything then started rack build.

Got the pulley mount to do yet. Will need to put something solid underneath as a pull up makes it want to lean forward when on the double layered carpet.

Not sure what I think about the dip handles only being welded one side.

post-23873-0-59868800-1367844488_thumb.jpg

post-23873-0-92572800-1367844553_thumb.jpg

post-23873-0-42652800-1367844614_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...