Jump to content
SAU Community

Recommended Posts

There is but only one criticism I have of your setup, and no, it's not the fact it's auto...

The radiator support, if your gearbox and motor setup was anything like mine, it means you're going to have to do the old split the gearbox and motor apart while in the car if you need to pull the motor out again... It's my only issue, I personally would have made that rail a bolt in piece...

And in saying that, it makes me want to finish mine off really badly :(

Yer I'm aware of this, I have a sneaky feeling that if its a bolt in piece it's illegal :/... Ill have to do more research lol.

GT-R > S2 > S1

It has an LS1, it needs a big T wing! :yes: haha

Come on Nik, more photos, more updates! And do your best on the weekend to get a vid of it running!

Now I know why you mentioned about putting a Holden badge on your R33.....

You should put an HSV badge on it :nyaanyaa:

haha u didn't realise from you know my car, listed... There <<<<

No hsv badge, thinking about a gts57 sticker done in gts25-t font ;).

And I'll do my best this week end for some videos mmmmkay, won't be anything exciting that will have to wait until happy laps in April.

Quick rev just to prove it runs ;) (best listened to with headphones as its really deep)

haha u didn't realise from you know my car, listed... There <<<<

No hsv badge, thinking about a gts57 sticker done in gts25-t font ;).

And I'll do my best this week end for some videos mmmmkay, won't be anything exciting that will have to wait until happy laps in April.

Quick rev just to prove it runs ;) (best listened to with headphones as its really deep)

No worries mate,

I apologies for being drop kick.

Project sounds and looks tough, gonna be for drag I presume???

No worries mate,

I apologies for being drop kick.

Project sounds and looks tough, gonna be for drag I presume???

Haha no worries man, and yer i only live about 45 minutes from willowbank so the car is being built as a weekend car for a bit of fun (but obviously with drag racing in mind as its my Motorsport of choice :wub:) and also as something different to a majority of the other 33s you see around.

When I eventually get it out to the strip ill post up videos.

yep, heard that.

I had my time at the drags a while back. A bit of hike for me though coming from the Gold Coast, but now I intend to be doing the same trip but to QR instead as I have converted from drag to circuit ;)

be great to catch up one day.

be great to catch up one day.

Don't do it, I thought the same thing 2 years ago when it was not the abomination it is today (And NIck I believe I was the first to call it an abomination) and I haven't been able to get rid of him ever since

Don't do it, I thought the same thing 2 years ago when it was not the abomination it is today (And NIck I believe I was the first to call it an abomination) and I haven't been able to get rid of him ever since

bahhh ahahahaahah Cap must be a top bloke then ;)

Nice write up mate. Love how easy you make it seem to fit the LS1 in lol.

Can't wait to see where this goes though :)

Haha I can't give away all the secrets, there is some issues you will run into ;)

bahhh ahahahaahah Cap must be a top bloke then ;)

Yer Chris hearts me :P, bring sime beer or scotch and we'll be best mates lol

Don't do it, I thought the same thing 2 years ago when it was not the abomination it is today (And NIck I believe I was the first to call it an abomination) and I haven't been able to get rid of him ever since

It's more the fact u need me to keep you on your toes, Tso's to placid without me lol, also yes u dubbed it the abomination ;)

yep, heard that.

I had my time at the drags a while back. A bit of hike for me though coming from the Gold Coast, but now I intend to be doing the same trip but to QR instead as I have converted from drag to circuit ;)

be great to catch up one day.

Hell yer man come up I attend most Wednesday night test and tunes just go around poking people and screaming "CAPTAIN!" until u find me lol

So had the car into an ultratune (rip off merchants of the earth) to be put over a diagnostics machine to find out what is wrong with this stupid gearbox the pricks charged me 106.45 for mayb 15 minutes "work" ie plug machine into obd2 port.

Anyway, it returned the errors codes for shift solenoid a&b and torque converter lock up failure. They basically told me to fark off as the had no interest in dealing with the issue any further. So now I'm back to square one, ill be checking the transmission fuse this arvo (as it only just occurred to me that it could be blown), other than the I guess it's anyone's guess as to what's wrong and just start with trial and error :angry:

THE PROBLEM: no 1st or 4th gear even when manually trying to select them, car takes off in 3rd unless you physically lock it in 1st or second in which case it starts in 2nd gear.

(Could be a faulty shift solenoid... I duno :rant:)

If anyone has experience with a 4l60e gearbox help is appreciated

Have you not got an auto place to take it too? If its a shift solenoid its not the end of the world man....

Is it staying in limp mode (assume 3rd) due to the fault codes? Did they clear them?

Have you not got an auto place to take it too? If its a shift solenoid its not the end of the world man....

Is it staying in limp mode (assume 3rd) due to the fault codes? Did they clear them?

Yer up in Toowoomba, everything's just an inconvenience due to the stupid p plates, will ring some auto places later this week. Hopefully a solenoid change isn't to expensive (if that's even what it is)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...