Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

With the help of my old man on the weekend we managed to make a decent effort at getting this rear end pulled apart on The Abomination :)

The worst part of the whole job was getting this sucker off, the other side came off so easy and this took 20 minutes of flogging with a hammer lol 84zEtHv.jpg

We did eventually get the old four stud rears off:W1LxpTp.jpg

Old shit house 3.58 viscous LSD out: 8pdGxaq.jpg

The new 4.11 2 way is fully bolted in and connected to the tailshaft but I didn't get any pictures. Next step is to fit up the five bolt half shafts and pick up a pair of rear 5 stud hub assembly's (also looking into a Hicas eliminator kit/lock bar)

  • 1 month later...

Ok so after multiple months off the road The Abomination is finally mobile again and out terrorising the rough streets of Gatton lol.

lrSPnps.jpg

*note the new clear indicators (awwyeah! :P)

Also ran into a few issues during the upgrades:

*new brakes didn't match old brake lines and decided to get a local brake store to make up new lines. After a week they call call me back and tell me they can't get the parts it (complete bullshit but whatever) ended up pulling a set off someone wrecking a 33 gtst

*After picking up a pair of rear hub assemblies I get them home and start putting them into the car only to realise one of them is from a Gtr and lacks the correct Hicas and suspention mountings.

*I return the hub and receive a replacement and then later on I find out the hubs bearings are stuffed and have about 6mm of play in it (which nearly made me crash the car) ended up getting new bearings and it all pressed back together.

ZvIlHuQ.jpg

*went to refit my old rims and they no longer clear the calipers (which sucks cause I really liked them lol) ended up buying a set if lenso d1rs in white and red, but they looked like aids so I painted them black

qLDARd7.jpg

GEfrzAi.jpg

Went for a cruise yesterday for about 2 hours, the new 2 way with the 4.11s feels amazing, no more nasty cam holes or peg legging. Couple knocks and clunks occasionally at low speed but nothing terrible.

SwWGLqG.png

Can't wait to grab a set of et streets and head out to willowbank :)

  • Like 1

you wanna be birds so bad.

Nobody wants to be birds... Ever

aint nobody got time for that mang

Exactly what ants said

Last picture is awesome!

Thanks mate, was taken up at Ravensbourne lookout near Toowoomba.

Also ran into a few issues during the upgrades:

*new brakes didn't match old brake lines and decided to get a local brake store to make up new lines. After a week they call call me back and tell me they can't get the parts it (complete bullshit but whatever) ended up pulling a set off someone wrecking a 33 gtst

*After picking up a pair of rear hub assemblies I get them home and start putting them into the car only to realise one of them is from a Gtr and lacks the correct Hicas and suspention mountings.

*I return the hub and receive a replacement and then later on I find out the hubs bearings are stuffed and have about 6mm of play in it (which nearly made me crash the car) ended up getting new bearings and it all pressed back together.

*went to refit my old rims and they no longer clear the calipers (which sucks cause I really liked them lol) ended up buying a set if lenso d1rs in white and red, but they looked like aids so I painted them black

You failed to mention putting the half shafts in the wrong way

You failed to mention putting the half shafts in the wrong way

After closer inspection the half shafts were infact in the right way, due to the bearing in the hub being f**ked out it was actually sitting out of the housing stopping the half shaft from going through completly.
  • 1 month later...

Sick skid ;) .. I havent just read this thread for an hour and a half.. :no::wub:

I thought I recognized the car in the first few pages before you got the plates and then when I saw the plates I was like "hey i've seen that car!!".

I got a couple of shots of you at the Willowbank Happy Laps on the 31/08/14 on my page Illuminated Designs.

P1010142_zps57c35b0a.jpg

P1010088_zps079c51b5.jpg

P1010048_zps9bcb5c0d.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Not that I know from experience, but in theory you'd want your gate spring to be as close to target pressure as possible, so you'd go with the higher gate spring?
    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
×
×
  • Create New...