Jump to content
SAU Community

Recommended Posts

OK I have one group ready to go

Beregron - Are you in NSW?

skyguy3804 - Are you in NSW?

FishinFreak

I'll PM you soon with a snapshot of what the cost is delivered to me in NSW.

P.S. If I can get another 3 people together I'll put another buy together.

Summit racing can have it to your door in 4-8 days for $280

Install is easy in my opinion,but if your not confident with hand tools see if you can get someone to fit it

Jetwreck would be the best option for the east coast boys

I'm west coast so I sorted it myself

How can summit have it you you door for $280? Thats where I just got the quote from.

1 = $310

2 = $294

3 = $288

There's a couple of WA guys that have contacted me before....I'll send your way if you don't mind.

How can summit have it you you door for $280? Thats where I just got the quote from.

1 = $310

2 = $294

3 = $288

There's a couple of WA guys that have contacted me before....I'll send your way if you don't mind.

A friend of mine got his for $280 as well :S

I found it under g35 stuff or 350z I think shift kit was $220 us then with shipping and currency was the rest

Off the invoice "trg-re5ro5a-HD2 shift kit" 229.97

A friend of mine got his for $280 as well :S

I found it under g35 stuff or 350z I think shift kit was $220 us then with shipping and currency was the rest

Off the invoice "trg-re5ro5a-HD2 shift kit" 229.97

yeh thats the one......Scotty's on the case in the background trying to find em cheaper or get em cheaper off my old supplier Mako!

OZ dollar is shit at the moment so its burning.

yeh thats the one......Scotty's on the case in the background trying to find em cheaper or get em cheaper off my old supplier Mako!

OZ dollar is shit at the moment so its burning.

A friend of mine got his for $280 as well :S

I found it under g35 stuff or 350z I think shift kit was $220 us then with shipping and currency was the rest

Off the invoice "trg-re5ro5a-HD2 shift kit" 229.97

I bought mine from "Summit" September last year.Cost $276.75 usd.Fro memory ended up about $270 with the then better exchange rate.

Back in the day we used to get em for about $250 delivered....but the current government has pretty much stuffed the Ozzie dollar for a while so no wins. I use to laugh at the idiot on eBay selling them is oz for $650+. I even tried to do a deal with repco at one stage telling them I would take what the had in stock....the best they would do for 20 was $430 aus each and 2 weeks for delivery... I had lolz and told em good luck! 30-40 kits later for the m35/v35/z33 crowd And i still think they have those kits....there loss and shows that there typical Australian retailers.

I bought mine from "Summit" September last year.Cost $276.75 usd.Fro memory ended up about $270 with the then better exchange rate.

September last year the doller was 105 cents to the US dollar. Now it's hovering around 90 cents so that 270 becomes 315-320 very quickly

Hey Jetwreck, im in WA, 6025

Footo has mentioned he may be co-coordinating WA buy?

I'll discuss this with Chris again but I did speak to him last night......I thought he was going to do an order directly to WA.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...