Jump to content
SAU Community

Recommended Posts

Ok, so my tacho and speedo are giving me the Sh#ts. Tacho is jumping all over the place then not working then ok. Had enough. The Nismo dash clusters on E-bay are going for $780-800 so can I put a GTR dash into a GTST ? They say in their advertising you can but excuse me for being sceptical. After all, E-bay wouldn't lie. Or should I just replace the tacho with a brand new stocker ? If the tacho and speedo are the same design perhaps I could just throw away the dash and just use the tacho & speedo as a simple replacement. Anybody done this ?

Link to comment
https://www.sau.com.au/forums/topic/424162-gtr-instrument-cluster-into-gtst/
Share on other sites

hey man i recently purchased a nismo 320km/h dash cluster and can confirm it works. all plugs are exactly the same and everything works as it should. check this one out. This is the same one I purchased. Cheapest you'll probably find: http://www.ebay.com.au/itm/JDM-Nissan-GTR-R33-BNR33-Nismo-320KM-11000RPM-Cluster-Gauge-GT-R-RB26DETT-/261176664139?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ccf57a04b

i have a GTR dash in mine, everything works but the oil pressure gauge seems to sit at the top so was wondering if that might be different... my brother has the 320km nismo unit in his and works perfectly,

its very worth it too, the gtst dash is a piece of shit!!

hey man i recently purchased a nismo 320km/h dash cluster and can confirm it works. all plugs are exactly the same and everything works as it should. check this one out. This is the same one I purchased. Cheapest you'll probably find: http://www.ebay.com.au/itm/JDM-Nissan-GTR-R33-BNR33-Nismo-320KM-11000RPM-Cluster-Gauge-GT-R-RB26DETT-/261176664139?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ccf57a04b

I know it's missing the window glass but I ordered it anyway. Hope I can get a replacement or my GTST glass fits. Thanks anyway.

Thanks Ravi, it's been posted so should be here soon. The one I have now has done 345,000k's, maybe that's why it,s playing up. As a side note, I was just discussing with a friend how in 12 years of ownership I have never blown a single bulb anywhere in the car, amazing. Let me know what you want for the GTR glass and I may buy it just in case.

  • 1 month later...

Well, I can confirm the Nismo dash into GTST R33 absolutely works. Very happy. Time consuming putting it in but mostly because I cleaned and polished as I went. Only annoying thing is the numbers on the speedo are so small. I'll get used to it though. Something tells me I may never see the needle at full speed. And the glass from the GTST is the same as the GTR. For those who have done this before obviously you know it works, this is just to let others know, thanks.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
×
×
  • Create New...