Jump to content
SAU Community

Recommended Posts

Hey all,

Ive been looking around like crazy but having no luck finding a hose from the power steering pump.

Now from my reservoir there are two a small one and the thicker one.

The small ones you can get replaced from autobarn/repco and them however the big one I cant find anywhere.

Nissan dealerships cant help out either so im guessing it has to be sourced from Jap or go to a hose manufacturer or something.

Anybody had theirs replaced??

Pic attached is the hose i was talking about taken from "Part Number" thread.

Thanks in advance

post-97314-0-55984700-1369722980_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/426014-98-gtt-power-steering-hose/
Share on other sites

ah cheers for the replies.

Kudos probably wont have it but ill give it a shot.

amayama.com under "49719: tube assembly, power steering" have it listed for $168USD + delivery, but no pictures so I cant be 100%

I will drop by enzed and have a look for a matching part - when I have confirmed it and replaced it ill post the results. All else fails ill order through amayama.

Edited by milanr34

ah cheers for the replies.

Kudos probably wont have it but ill give it a shot.

amayama.com under "49719: tube assembly, power steering" have it listed for $168USD + delivery, but no pictures so I cant be 100%

I will drop by enzed and have a look for a matching part - when I have confirmed it and replaced it ill post the results. All else fails ill order through amayama.

They won't have a matching part - they will make up a suitable hose.
  • Like 1

Yea Kiwi,

I didnt have a chance to do it this weekend because of all the rain, but this Saturday coming up I will ask them to make the hose and give me the specifics. Upon the results I will post them here so others can know exactly what to get.

  • 2 weeks later...

Well I gave them a call and they said they dont have those parts......anywhoo what i did do is a total flush and cleaned the hose thorough and put it back in.

After testing for leaks there wasn't any so ill leave it sitting for a bit and see what happens - could be that the previous owner didnt put the clamp on properly.

Either way ill report once its back in.

Out of curiosity which NIssan place did you call?

im from SA, I had part numbers which I found on the forums
went to my local Nissan dealership (lakeside Nissan) paid a deposit, they ordered the parts in. from melb I reckon
had them in a few days

reckon I paid about $150 odd for both hoses. bit pricey for hoses

Well I gave them a call and they said they dont have those parts......anywhoo what i did do is a total flush and cleaned the hose thorough and put it back in.

After testing for leaks there wasn't any so ill leave it sitting for a bit and see what happens - could be that the previous owner didnt put the clamp on properly.

Either way ill report once its back in.

Out of curiosity which NIssan place did you call?

Update:

Turns out my hose wasn't split it was damp due to the top clip not being on properly. So as such there was no need to replace it.

However would be good if anybody can advise the part number of that hose as I see some SAU members need it as well. Ill keep on searching and post the results if I find anything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bah! I can't see the point in custom number plates at all. I went to the rego office, fished through a box of "premium" plates (the ones that had the "not as tall" option for the front plate) and picked the one that had a 32 in it. That's the limit of the effort and cost I will put into number plates. The only plate that I'd consider paying for would be 2332, but that's not possible here because it already exists from probably 90 years ago, and it would cost a fortune to obtain it, if it were available.
    • After chasing my tail with LS results..... and cheaper than a turbo swap... How confident are you that the dyno is accurate relative to other results? How fast is the car - What MPH does it actually run? Is this similar to what people running this power would expect?
    • Hi mate I am having an identical issue with my 98 R34 GTT. The engie suddenly cuts out under load at about 3-4k, black smoke out exhaust. Almost feels like traction control kicking in. No CEL but still going to check codes later today. Car was sitting in the shed for about 5 months before hand and only idled a few times, took her out with about 1/4 tank, filled up and thats when the issues started happening.  Threw on a spare set of coils/harness and checked plugs which was no help. Recently had fuel pump/filter changed so surely thats not the issue unless condensation in fuel, I just havent had the time to drain it It's running a hi flow turbo, bosch 1000cc injectors, walbro 450L, Z32, Nistune etc... All about 2000km old.
    • I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
×
×
  • Create New...