Jump to content
SAU Community

Recommended Posts

Hey all,

Ive been looking around like crazy but having no luck finding a hose from the power steering pump.

Now from my reservoir there are two a small one and the thicker one.

The small ones you can get replaced from autobarn/repco and them however the big one I cant find anywhere.

Nissan dealerships cant help out either so im guessing it has to be sourced from Jap or go to a hose manufacturer or something.

Anybody had theirs replaced??

Pic attached is the hose i was talking about taken from "Part Number" thread.

Thanks in advance

post-97314-0-55984700-1369722980_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/426014-98-gtt-power-steering-hose/
Share on other sites

ah cheers for the replies.

Kudos probably wont have it but ill give it a shot.

amayama.com under "49719: tube assembly, power steering" have it listed for $168USD + delivery, but no pictures so I cant be 100%

I will drop by enzed and have a look for a matching part - when I have confirmed it and replaced it ill post the results. All else fails ill order through amayama.

Edited by milanr34

ah cheers for the replies.

Kudos probably wont have it but ill give it a shot.

amayama.com under "49719: tube assembly, power steering" have it listed for $168USD + delivery, but no pictures so I cant be 100%

I will drop by enzed and have a look for a matching part - when I have confirmed it and replaced it ill post the results. All else fails ill order through amayama.

They won't have a matching part - they will make up a suitable hose.
  • Like 1

Yea Kiwi,

I didnt have a chance to do it this weekend because of all the rain, but this Saturday coming up I will ask them to make the hose and give me the specifics. Upon the results I will post them here so others can know exactly what to get.

  • 2 weeks later...

Well I gave them a call and they said they dont have those parts......anywhoo what i did do is a total flush and cleaned the hose thorough and put it back in.

After testing for leaks there wasn't any so ill leave it sitting for a bit and see what happens - could be that the previous owner didnt put the clamp on properly.

Either way ill report once its back in.

Out of curiosity which NIssan place did you call?

im from SA, I had part numbers which I found on the forums
went to my local Nissan dealership (lakeside Nissan) paid a deposit, they ordered the parts in. from melb I reckon
had them in a few days

reckon I paid about $150 odd for both hoses. bit pricey for hoses

Well I gave them a call and they said they dont have those parts......anywhoo what i did do is a total flush and cleaned the hose thorough and put it back in.

After testing for leaks there wasn't any so ill leave it sitting for a bit and see what happens - could be that the previous owner didnt put the clamp on properly.

Either way ill report once its back in.

Out of curiosity which NIssan place did you call?

Update:

Turns out my hose wasn't split it was damp due to the top clip not being on properly. So as such there was no need to replace it.

However would be good if anybody can advise the part number of that hose as I see some SAU members need it as well. Ill keep on searching and post the results if I find anything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...