Jump to content
SAU Community

Recommended Posts

yesss will be keeping a close eye on that. Thats going to be a very interesting result.

Well we already know what sort of result its run on a crazy Evo, Now itll just run on another crazy Evo :P

It will make around the 480 - 520KW mark on a well prepped Evo at approx 35psi.

But I guess the thing to watch will be the powerband, not really the topend.

Soft!

Probably not a setup most people would go for on RB25s, a HTA3582 will make more than enough for what most people would need in a RWD - so I'd not hold my breath for that one haha. A mate's GTR (RB30/26) is going on the dyno with his HTA3586 tomorrow on E85 so I'll update on how that goes.

Probably not a setup most people would go for on RB25s, a HTA3582 will make more than enough for what most people would need in a RWD - so I'd not hold my breath for that one haha. A mate's GTR (RB30/26) is going on the dyno with his HTA3586 tomorrow on E85 so I'll update on how that goes.

So you saying no Super 94 for me next? :( lolz

Cant wait for your results! :yes:

You do nothing but skids so it's EXACTLY what you need!! ;)

Lol sonofabitch! Problem is i cant argue as since the tune it hasnt been used :( lol

And why is that?? I'd have thought you'd have put thousands of kms on it!!

After Texi it ended up with a screw through the tyre... After that our yard turned into a mud pit and i cant get it out of the shed! No real reason, just shitty stuff!

Lol of all the reasons... :)

I hate getting a slow puncture, that ruined my kumhos and forced me to change early.

No mechanical issues thats for sure! Its next appearance will be the SAU Putty Rd cruise! Will do some suspension work before then but other than that it should be sweet!

So you saying no Super 94 for me next? :( lolz

Cant wait for your results! :yes:

Ran into electrical gremlins on the dyno - it's a freshly built race car, and it was a bit of a rush to get it on the dyno. It made 500awkw (rolling road) on 24psi running E85 with more in it, but I doubt that will happen too soon.... I'll naturally update when anything else happens :)

Ran into electrical gremlins on the dyno - it's a freshly built race car, and it was a bit of a rush to get it on the dyno. It made 500awkw (rolling road) on 24psi running E85 with more in it, but I doubt that will happen too soon.... I'll naturally update when anything else happens :)

Shame about the Gremlins but..... :woot: :woot: :woot:

Ran into electrical gremlins on the dyno - it's a freshly built race car, and it was a bit of a rush to get it on the dyno. It made 500awkw (rolling road) on 24psi running E85 with more in it, but I doubt that will happen too soon.... I'll naturally update when anything else happens :)

Was this with a 1.03 exhaust housing ? Do you think it will make 600kw with more boost ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...