Jump to content
SAU Community

Recommended Posts

  • 5 months later...
  • 2 years later...
  • 4 months later...
  • 1 month later...
  • 1 year later...
On 6/22/2016 at 1:41 PM, Prestige Motorsport said:

Thanks for the mention, I'm sure you'll love the car when it arrives. :) If anyone is interested to see some example auction inspections undertaken in Japan to understand the efforts we go to at auction to ensure we source only the best cars, you can check them out here: http://prestigemotorsport.com.au/inspection-examples/

Prestige Motorsport (PM) has a nice web page. However, they never answer phone calls. Has anyone used PM? I am going to get an Estima hybrid in the near future. Recommendations for a good importer would be much appreciated. JACE has a range of nice import cars. However, the selection would be narrorwer than Japanese auction. 

42 minutes ago, yangys said:

Prestige Motorsport (PM) has a nice web page. However, they never answer phone calls. Has anyone used PM? I am going to get an Estima hybrid in the near future. Recommendations for a good importer would be much appreciated. JACE has a range of nice import cars. However, the selection would be narrorwer than Japanese auction. 

Thanks yangys for your feedback on our website, however "they never answer phone calls" simply is not true. Please bear in mind that I get a lot of calls every day, and I spend considerable time explaining the import process and providing price estimates in order to provide the best service - I don't believe in asking for payment unless I can definitely assist. I am also busy with auction inspections and bidding for clients throughout the day, and this year post-covid has been the busiest time for imports in 20 years. Clients must come first on busy auction days, general enquiries second. If I am on the phone or busy, I'm sorry but your call will go to message.

Being based in Perth, some early morning calls inevitably go to message with the 3 hour daylight savings time difference. Nevertheless I make sure to return all calls as soon as possible, and for clients I am available pretty much 24/7.

For impartial feedback from clients, you can check our Facebook Reviews and Google Reviews.

My number is on our website, and you are welcome to call me now if you want. You can also email me, I answer most mails within the day, if not within the hour. Just note that we will be closing up early this year on 19th Dec, it's been such a big year that we are taking a few extra days off.

So, that being said... :) Regarding the Estima hybrid, you've made a good choice. They are great cars and will be one of the most popular imports to Aust in coming years as the petrol-only Estimas will be excluded from import with the new SEVS from about 2022. The Toyota Synergy Drive system is one of the best hybrid systems available, and these get impressive fuel economy as well as being very easy to drive and reliable. Most cost effective at the moment for Aust (as of Dec 2020) would be a higher km 2010 to 2014 model. These are in the sweet buying range for price, age, condition and features. Low km hybrids are still relatively expensive.

I have lots of sales data I can send you if needed, and you're welcome to free trial our automated auction alerts system as well to receive daily updates of available Estima hybrids.

Geoff

Edited by Prestige Motorsport

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
    • Literally looks like direct port nitrous haha
    • They are in fact just nozzles. They are there only to produce a spray pattern and limit flow. The injector itself is what I use to control flow to the 7x nozzles. My old system had no injector and only PWM the pump. This lead to a lot of inconsistencies, and poor atomization at low pressure when the pump was ramping up. 
×
×
  • Create New...