Jump to content
SAU Community

Recommended Posts

God bless QLD.

I'd say the "reported by an officer of the Victorian Police" Is either A) an off-duty member of the service, as previously noted or B) Perhaps an officer in traffic noticed your car ahead of them or driving the other direction and noted the plates to report and follow up on, as it didn't warrant pulling you over at the time.

  • 2 weeks later...

And to add to what Terry said - in NSW there is an actual EPA iPhone app. All you have to do is type in the rego of a smokey/noisey car and press 'send'.

Nek minut, letter in mail.

(As a side note, if you're a car enthusiast in NSW my suggestion would be to download that app, and report as many smokey rust buckets as you can - keep them busy with other things ;-))

What's this app called? Doesn't seem to exist.

Edited by badben

What's this app called? Doesn't seem to exist.

It must have been taken down.

All the info is here on the nsw govt website though:

http://www.epa.nsw.gov.au/pollution/ReporttoEPA.htm

I have physically downloaded it before, so it did exist at one point not long ago - deleted it when it wasn't Vic specific.

  • 2 weeks later...

As it has been mentioned. We gotta get thr harleys off the road. But the other day I am at the servo. And I hear the greatest sound to ever grace my ears. It was a purple 1970 'cuda with a blown 605 cube hemi pulling her along. I want to know how it was legal to have something that loud on the road yet I get pulled over for a skyline with a zorst.

Now you have to understand how loud this thing was. I heard it honest to god 3 minutes before I saw it. When it finally came to view, I rolled into the servo running on this monstrous mechanical camshaft lobing at around 2000rpm. Three people filling their cars up threw their hands over the ears. People inside the serrvo started coming out as they had no idea what it was.

This car was in fantastic condition. I got talking to him and told me it had 1400 hp and 800 ft pnd of torque. The kind of numbers that could dwarf nearly any car on this website AND be legal.

Just because it is a classsic or he may have some fancy hot rod rego makes it no less of a distraction to drivrrs as my car ata tenth of the volume. So how can they justify making it legal. Even if it only gets driven once a month or whatever on the rego it might have. That one drive a month would scare more drivers then I could in a year If I tried

As it has been mentioned. We gotta get thr harleys off the road. But the other day I am at the servo. And I hear the greatest sound to ever grace my ears. It was a purple 1970 'cuda with a blown 605 cube hemi pulling her along. I want to know how it was legal to have something that loud on the road yet I get pulled over for a skyline with a zorst.

Now you have to understand how loud this thing was. I heard it honest to god 3 minutes before I saw it. When it finally came to view, I rolled into the servo running on this monstrous mechanical camshaft lobing at around 2000rpm. Three people filling their cars up threw their hands over the ears. People inside the serrvo started coming out as they had no idea what it was.

This car was in fantastic condition. I got talking to him and told me it had 1400 hp and 800 ft pnd of torque. The kind of numbers that could dwarf nearly any car on this website AND be legal.

Just because it is a classsic or he may have some fancy hot rod rego makes it no less of a distraction to drivrrs as my car ata tenth of the volume. So how can they justify making it legal. Even if it only gets driven once a month or whatever on the rego it might have. That one drive a month would scare more drivers then I could in a year If I tried

Don 't be fooled mate; these guys get hit by the EPA just the same.

If he's managed to get an engineering approval for it; as soon as he gets stopped for a stationary noise test; he'll be screwed. They'll go over it with a fine tooth comb, and give him enough defects to put him off the road.

It's not about pointing the finger at someone else who's making noise; it's about making sure yours is compliant.

Don 't be fooled mate; these guys get hit by the EPA just the same.

If he's managed to get an engineering approval for it; as soon as he gets stopped for a stationary noise test; he'll be screwed. They'll go over it with a fine tooth comb, and give him enough defects to put him off the road.

It's not about pointing the finger at someone else who's amking noise; it's about making sure yours is compliant.

Oh no I am not pointing the finger. Simply saying that the hot rods and harleys seem to get away with it. As I have never seen one of either that would be legal volume so I assumed they had a permit

A nd if that was the case, I was complaining about how their cars at 5x the volume are not a problem and mine is

Oh no I am not pointing the finger. Simply saying that the hot rods and harleys seem to get away with it. As I have never seen one of either that would be legal volume so I assumed they had a permit

And if that was the case, I was complaining about how their cars at 5x the volume are not a problem and mine is

I really don't think they do; I know a bunch of guys running cafe racers, & Harleys, let me assure you that they do get noticed.

I've had bikes with noisy pipes, and even though they've been ADR legal I've been given a hard time.

Hot Rods are also able to have club rego, and this bypasses a bunch of requirements.

The fact that they don't get get pinged, is largely related to the amount of usage these types of vehicles get, and also when/where they are used.

The fact that they don't get get pinged, is largely related to the amount of usage these types of vehicles get, and also when/where they are used.

yeah this is the main reason....

Brisbane and its suburbs is not exactly what u'd term as small plus these are definitely not their daily rides so....

so if you have a Ferrari or Lambo or a Zonda or a anything exotic and loud from the factory you can get done for EPA?

Those cars are loud as a raging porn star, so if you get an EPA notice how does that work in the scheme of things for noise?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...