Jump to content
SAU Community

Recommended Posts

FYI before you buy that. That is a piping kit only, no intercooler in the set.

as stated in the link:

* Complete chrome polish aluminium piping kit ONLY. This does not include the CORE

Read the link good before you invest in it especially ebay items.

FYI before you buy that. That is a piping kit only, no intercooler in the set.

as stated in the link:

* Complete chrome polish aluminium piping kit ONLY. This does not include the CORE

Read the link good before you invest in it especially ebay items.

My god to think i nearly fell for it

For $199 it would have to be pipes only OR the shittiest product known to man, you get what you pay for and if you spend that kind of money on a brand new cooler kit I reckon you will end up with a nice paperweight.

Intercoolers are pretty cheap, mine is a "coolingPro" intercooler which was $400 for the kit and its worked well enough for me.

just jap have some, might be cheaper if you search around other places though

http://justjap.com/store/home.php?cat=271&page=3

Intercoolers are pretty cheap, mine is a "coolingPro" intercooler which was $400 for the kit and its worked well enough for me.

just jap have some, might be cheaper if you search around other places though

http://justjap.com/store/home.php?cat=271&page=3

Big difference from $199 too $400 though mate! And have you seen pics of what happens to cheap chinese coolers when you feed decent boost through them? LOL

Depends on which ling long yum cha spec, HDi is ling long, but decent enough for most cars doing about 300kW.

I've currently using a HDi pos cooler with some sex spec plazmaman piping, let's see how it performs once I give it some boost.

im also looking at replacing my front mount. currently running a 600x300x76 but the core has been damaged. its a cheap china one thats one currently on there.

new combo is 6 boost manifold, gtx3076, 50mm turbosmart external gate, plazmaman plenum.

dont think i can justify spending $700-800 on a plazmaman cooler so what are the cheaper alternatives? just jap or is there something reasonaly priced inbetween which is better?

  • 2 weeks later...

Pot luck with cheapies. Mine cost me $50 brand new 600*300*76, running 18psi from a GT3076r no problems so far. Before that came up I was saving for a Just Jap "Monster type" 600*300*100 and for I think $240 or however much they were/are, they were the thickest core for so cheap that I found. With the thinner core for a little cheaper being proven over 300rwkw as said, it seems like the best cheap option.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...