Jump to content
SAU Community

Recommended Posts

Hi Guys

So I span out and hit the left hand side both rims + tyres against the sidewalk. Both right sides are okay.

Front left will not hold air, back left will hold a small amount air.

Are these fixable? If so , how much on average and any recommendations on whom to take it to ? (not sure what the materials of these rims are or how many piece they are, if anybody knows please chime in)

Veilside Andrews 18' Chrome

F 235 40 18 +38 offset

R 255 35 18 +38 offset

located in menai , sydney

Front

20130625_161408_zps46078890.jpg20130625_161408_zps46078890.jpg

Rear

20130625_160914_zps491c1489.jpg

20130625_161424_zps38e21827.jpg

Would love to get my car back on the road ASAP , any help appreciated.

Thanks in advance

Edited by tripsteady

If it was me I'd buy that set of wheels I always wanted.

or a cheaper good set.

Those Veilsides don't appear anything super special to spend money to repair

thanks , but i wasnt asking for your opinion on the wheels itself , i love how they look on the car and dont have the money right now to splurge on those set of xxr's ive always wanted. just trying to ascertain whether its worth repairing those two(or even possible) or should I simply go out and drop a few hundred on a set of povo rims?

Centres are alloy, not sure of outside. if its the rear rim in the 3rd photo there's a crack near the valve stem on the centre section that will need looking at, but they are repairable (have had a few fixed that were worse)

Centres are alloy, not sure of outside. if its the rear rim in the 3rd photo there's a crack near the valve stem on the centre section that will need looking at, but they are repairable (have had a few fixed that were worse)

cheers man . yes funnily enough the worse looking rear rim can hold some kind of air while the front doesnt even fill up

pm sent re price of repair

XXRs arent a great deal of money, I had my old set landed for $800. After getting these all fixed up and looking pretty again you wouldnt be far off the price of a new set of XXRs man. Maybe just get some cheap shit wheels to get it driveable and save up for the new ones you wanted?

XXRs arent a great deal of money, I had my old set landed for $800. After getting these all fixed up and looking pretty again you wouldnt be far off the price of a new set of XXRs man. Maybe just get some cheap shit wheels to get it driveable and save up for the new ones you wanted?

XXRs arent a great deal of money, I had my old set landed for $800. After getting these all fixed up and looking pretty again you wouldnt be far off the price of a new set of XXRs man. Maybe just get some cheap shit wheels to get it driveable and save up for the new ones you wanted?

well looking at estimates after research it seems to be about 150-170 per wheel to fix it. two more tyres and thats about $500. Dont want to have to waste time finding some povo rims , fir them on , then save up again (unfortunately because of uni and work my priorities are not my car anymore so all mods are on hold until my savings are back up)..

prefer to spend abut $500,get my car back on the road and leave it as that

my advice would be get a set of stock rims, whatever, can be had cheap (100-200) sometimes including tyres too - of course depending on condition, but could last you until you save up for whatever you want.

but yeah you could just fix them up and run them again. but i think, having read AND talked to other wheel repairers (i had buckles worse than these), even if you fix them they will never be the same structural integrity again AND not to mention, do you know if the buckle goes all the way to the other side? Something that bad usually buckles the entire rim...if you stick it on a wheel balancer you'll see. Thought it's obviously bad enough to not hold air so...yeah

my advice would be get a set of stock rims, whatever, can be had cheap (100-200) sometimes including tyres too - of course depending on condition, but could last you until you save up for whatever you want.

but yeah you could just fix them up and run them again. but i think, having read AND talked to other wheel repairers (i had buckles worse than these), even if you fix them they will never be the same structural integrity again AND not to mention, do you know if the buckle goes all the way to the other side? Something that bad usually buckles the entire rim...if you stick it on a wheel balancer you'll see. Thought it's obviously bad enough to not hold air so...yeah

hmm, this means i have to get the car to pedders and have it highered before putting the stock ones on as well..another hassle..

honestly...i dont see myself spending money on quality rims for some time , got alot of other stuff to do first. would love to just get these fixed....if possible...

got a reply from these guys,they claim the wheel isn't fixable :( hope they are wrong

Ide just hunt down a set of cheap rims and tyres, they are out there. Standard 5x114.3 falcon / territory rims will clear your brakes and can be had with usable tyres for under $200. Hell, I just got myself a set of r32 gtr wheels with yokohama advan r1s with near full tread for $400. In the long run, you will have more money in your pocket by getting something cheap to suit in the meantime then you would finding a place to fix these.

  • Like 1

Remove the 2 wheels and take them to some place like Magman: http://www.yellowpages.com.au/nsw/punchbowl/magman-workshop-for-wheels-12104555-listing.html, if he can fix them it will probably be $80-100 each. tyres look fine? they likely won't be holding air because of the damage to the lip of the wheel - not making a proper seal...

There is a company down in wollongong (unanderra actually) called spot on wheel repairs.

When i aquaplained into a ditch on the highway headed home one night, my left rear rim looked like a cresent moon!! and the front left took a bit of a bump too.

I had work equips on the car.

The centers were ok thankfully.

These guys took all 4 rims, pulled them apart, resprayed the centers for me, straightened out the barrels, repolished the barrels and put them all back together again, and they looked a million dollars. Ran straight and true, balanced very well and held air like a brand new rim.

Although it cost me a grand to get them that way, but they looked brand new.

So if you only need two of them done, and not worried about the center respray, you should get away with under $500 (hopefully).

will remove tomorrow

looking at a few cheapies in the meantime :

http://www.gumtree.com.au/s-ad/sydney-region/wheels-tyres-rims/rims/1021626824

would 255 tyres rear and 235 front fit on an 8 inch wide rim?

255 is too wide for 8", 235 is spot on.

You have a wide selection of wheels you can use. Just look for stockies with tyres.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...