Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • 2 months later...

Stormie,

Probably a bit late but if it helps....I had the same problem. Looked around at a lot of tyres (considered the Yokohama's 'cos they are OEM on the 370Z but couldn't get a reasonable price) but finally went with a newer offering from Falken, the PT722. I had not thought about that brand as my impression was just cheap passenger car crap, but these are actually pretty good tyres. I went up a size so 235/50-18 on the front and 255/45's on the rear and walked out with change from a grand!

And don't get caught up in the bullshit about speed rating - at 180Kph that's it, so why pay through the nose for a Z rated tyre?

The Falken's probably don't have the same level of adhesion as say a Continental tyre, but they do have a lot of feel when pushing the car hard.

For the price not a bad deal.

Because there is more to the speed rating of a tyre than the actual top speed that the car will go.

Its more about tyre construction, and torque handing characteristics of the tyre.

Not to mention voiding your insurance...

In SA (and I think other states are similar) the law says:

"The speed rating of the tyres fitted to a passenger vehicle must be at least 180 km/h ('S') when the tyre placard requires a higher speed rating than 'S', for all other vehicles a speed rating of at least 120 km/h applies ('L')."

So putting S rated tyres on any car won't void the insurance, nor is it illegal. In my opinion, if a tyre is rated to 180 kph (and you can bet there is a decent safety margin - the tyre won't explode at 181 kph), and I'm not using it on a track, I believe that the tyre construction & torque handling characteristics will be more than sufficient for our nanny-state speed limits.

Agree with you GeeDod.

The PT722's are rated V so 240Kph should handle it.

I understand that the higher the rating the better a tyre [should] be, but you would like to think that a modern tyre of this size and profile would provide the expected quality.

My point was more to the significant jump in price when you spec W or Z tyres when realistically most of us wouldn't push quite to the limits where we would notice the difference.

370GT SP has 19in wheels as std

370GT SP has 19in wheels as std

I think wogboy is bang on the money. I was going to say the same, and surprised nobody else has mentioned it. Each and every one of the 4 sp's my mates and I have brought out had 19" wheels.

So either;

1. It's not an sp model.....sorry

2. It's an sp with de-specced wheels.....sorry

3. I'm misinformed....in which case, I'm sorry

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...