Jump to content
SAU Community

Recommended Posts

I'm no economist but only trying to join some dots, am I...

Q Why are ex-gov't vehicles these days consisting of Renaults, Peugeots, Hyundais as well as Fords, Camrys & Holdens?

Q If Renaults, Peugeots and Hyundais somehow get damaged, don't their replacement parts come from France and Korea?

Q Doesn't Australia have a parts industry for our Fords, Camrys and Holdens (not including Cruze-Daewoo)?

Q If Australian CommCars are Aussie made vehicles, then why can't other state gov't and local gov't vehicles be Aussie made too?

Q Extrapolating, why can't all vehicles be Aussie made when the purchasing officers of the following departments do their sums?

* Prisons

* Health workers

* Hospitals

* Pathology

* RTA/RMS

* Buses (now there's a new market)

* Trains (another new market)

* RailCorp

* Councils

* Police

* Judiciary

* Dept of Secondary and Primary Education

* Universities

etc etc etc

Q Am I on the right page here?

Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7027730
Share on other sites

I'm no economist but only trying to join some dots, am I...

Q Why are ex-gov't vehicles these days consisting of Renaults, Peugeots, Hyundais as well as Fords, Camrys & Holdens?

Q If Renaults, Peugeots and Hyundais somehow get damaged, don't their replacement parts come from France and Korea?

Q Doesn't Australia have a parts industry for our Fords, Camrys and Holdens (not including Cruze-Daewoo)?

Q If Australian CommCars are Aussie made vehicles, then why can't other state gov't and local gov't vehicles be Aussie made too?

Q Extrapolating, why can't all vehicles be Aussie made when the purchasing officers of the following departments do their sums?

* Prisons

* Health workers

* Hospitals

* Pathology

* RTA/RMS

* Buses (now there's a new market)

* Trains (another new market)

* RailCorp

* Councils

* Police

* Judiciary

* Dept of Secondary and Primary Education

* Universities

etc etc etc

Q Am I on the right page here?

This used to be the case but as part of the various Free Trade Agreements made under Howard (and pursued by Labor), these rules had to go. Forcing Government employees to purchase local is considered protectionism which is BAAAAAAAD apparently. Of course, we didn't, nay couldn't, force this upon our fellow FTA friends cause we don't have the bargaining power, but we'll happily let our industry die due to it. The US still have these rules in place as well as many other rules excluding Australian products from being imported as well as subsidies for their local industries, however this is apparently "Free Trade".

As for money for the car industry, it's a necessary evil. There are literally hundreds of thousands of people employed in the car industry chain. And on top of that we pay very little compared to pretty much every other country which manufacturers cars.

The next 6 months will be interesting. Abbott decried the money going to Ford and Holden as wasteful. Has he painted himself into a corner or will he simply bullshit his way out of it and hand them cash anyway?

Oh, and the point made earlier regarding Toyota, Ford, Holden and Toyota share many components made locally. Those component manufacturers can only continue manufacturing as long as the volume is high enough. Take Holden out of the picture and many of those companies won't be able to survive based on Toyota volumes alone so they go to the wall meaning Toyota can no longer source parts locally leaving them high and dry.

Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7027826
Share on other sites

Yes, we'll adding insult to injury 10mins ago, there's a Police Peugeot on the M4

Number plate CHRSCO

Diamond Creek police have a brand new black marked Chrysler 300c SRT as a chase vehicle.

Edited by Cowboy1600
Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7027916
Share on other sites

I'm no economist but only trying to join some dots, am I...

Q Why are ex-gov't vehicles these days consisting of Renaults, Peugeots, Hyundais as well as Fords, Camrys & Holdens?

Q If Renaults, Peugeots and Hyundais somehow get damaged, don't their replacement parts come from France and Korea?

Q Doesn't Australia have a parts industry for our Fords, Camrys and Holdens (not including Cruze-Daewoo)?

Q If Australian CommCars are Aussie made vehicles, then why can't other state gov't and local gov't vehicles be Aussie made too?

Q Extrapolating, why can't all vehicles be Aussie made when the purchasing officers of the following departments do their sums?

* Prisons

* Health workers

* Hospitals

* Pathology

* RTA/RMS

* Buses (now there's a new market)

* Trains (another new market)

* RailCorp

* Councils

* Police

* Judiciary

* Dept of Secondary and Primary Education

* Universities

etc etc etc

Q Am I on the right page here?

Maybe Australia needs to start making more smaller and economical vehicles on-par or better than the overseas manufacturers. I think Holden make the Cruze locally - but I guess there is a stigma that its roots are Korean.

I'm sure most reason why these government agencies choose international is because they can offer cars that do not depreciate fast (via the leasing company) and are good on fuel.

On a side note - If Holden/Toyota sold an economical turbo charged 1.6L to 2L RWD cars with handling to match and the size of a Corolla - it can easily capture the interests of motoring enthusiasts around the world.

Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7028910
Share on other sites

As far as Toyota goes the Australian cent is almost equal to the yen now (ie AUD$ is very expensive) so if Holden were to stop producing and component makers in Australia increased their prices there would be a lot of pressure on Toyota to just import all cars from Japan etc. On the other side of the coin the high dollar means Australia could import engines for cheaper - VL for the 21st century sounds like heaven to me :D

As far as producing a 1.6L-2.0L turbo car goes I think that is a pretty crowded niche with a limited market - admittedly RWD would make it unique but it would probably end up costing more than an AWD car from Europe or Japan and much more than an FT86. I think Holden have a good niche with the Commodore, being able to sell it overseas and using it as a base for other GM RWD cars. If only they could get an electric/hybrid etc powered one developed and get rego/tax subsidies for owners in Australia (as Japanese EVs/hybrids get in Japan) then it would be great - but I guess that probably doesn't fit in with GMs global plan - Volt etc).

Edited by *LOACH*
Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7029133
Share on other sites

On a side note - If Holden/Toyota sold an economical turbo charged 1.6L to 2L RWD cars with handling to match and the size of a Corolla - it can easily capture the interests of motoring enthusiasts around the world.

2L turbo rear wheel drive. I don't know why Hyundai isn't pushing this here.

hyundai-genesis-coupe-3-big.jpg

Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7029374
Share on other sites

  • 2 weeks later...

if 100yen to the dollar, aus dollar is good return since the yen is really high. Its not 1 yen to the dollar, its 100yen to the dollar.

If there is only one buyer for goods and lots of goods, then the power lies with the buyer, not the seller, which means that if toyota was alone it could command whatever price it wanted, with only a few players, ref they only assemble here, they don't manufacture anyway, they still command the price they want anyway.

Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7051744
Share on other sites

if 100yen to the dollar, aus dollar is good return since the yen is really high. Its not 1 yen to the dollar, its 100yen to the dollar.

If there is only one buyer for goods and lots of goods, then the power lies with the buyer, not the seller, which means that if toyota was alone it could command whatever price it wanted, with only a few players, ref they only assemble here, they don't manufacture anyway, they still command the price they want anyway.

Is this post directed at me? If so you will note that in my post I said that "the Australian cent is almost equal to the yen now". Note Australian CENT not dollar.

In addition I don't understand your supply and demand point. Do you mean Toyota as buyer, if it were to be the only manufacturer in Australia, would be able to dictate prices to parts manufacturers? Or do you mean Toyota as seller, if it were to be the only manufacturer in Australia, would be able to price cars however they wanted? I don't think either of these points are valid.

Edited by *LOACH*
Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7052446
Share on other sites

Shut Holden and use the money for one out of a million and one better things than bailing it out. What is to say that giving them the cash is going to sustain the company on the long run (10-15yrs)? Nothing. And what happens when they go broke again? Aussie cars are simly not as popular and as sought after as before. Jap and german are dominating and its not hard to see why. You get a lot of car for less money. Holden keep making rubbish everyday cars and their "performace" range is full of single cam terrible motors and vehicles. If they want to stay in business they should raise the cash, not tax payers, most of whom dont drive holdens and never will. Use the money for something else.

Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7057210
Share on other sites

Q Extrapolating, why can't all vehicles be Aussie made when the purchasing officers of the following departments do their sums?

* Trains (another new market)

* RailCorp

I'll chime in with the only topic listed i know anything about...

even if an existing international company like Siemens brought production of national trains to Aus, it'd be way too expensive an exercise for a country with different rail networks (system voltages, comms, track width, sizes) that dont buy enough trains on a regular basis. I'm sure siemens already has technicians based out here who assemble and probably repair the trains. I think thats about as good as its going to get.

Link to comment
https://www.sau.com.au/forums/topic/428433-holden/page/2/#findComment-7065204
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...