Jump to content
SAU Community

Recommended Posts

My understanding was always that the knees come in when you're approaching your weight limit. You might have to do some assistance exercises or maybe some band work to help you at the problem point.

When do your knees start turning in? Coming up or going down?

I'm not savvy enough on squat mechanics to suggest which muscle you want to target, Rev would have a better idea, but I'm thinking anterior adductor (inner thigh) and ITB (outer quad) stability could be a problem?

I've used brackets just in case my terminology is wrong :)

Yeah it started doing it at 50kg last night which isn't that heavy for me, but yeah the 60kg was bad it was making my whole body lean to the left as I was coming up.

My knee is fine going down, it's as I come back up that it bends in and it's only the right knee, so therefore it's my left leg predominantly the adductor that is weak?

I was wondering if just doing leg extension, leg curls and lunges on the left leg would help at all

Left leg/glute is weaker than the right; right knee is coming in to save the day and you're shifting the weight over the right leg when the weight gets too heavy for the left to push it's share.

It's a mobility issue that needs to be trained out of the CNS, not unlike a dominant arm during bench press but more exacerbated. Your adductors aren't weak, you just don't know how to use them (or moreso, not use them) to keep the right leg from coming in to save the day when "shit hits the fan" and the left leg/glute can't drive anymore.

Interesting. Stuff, I'd say the right is compensating for the left.

EDIT: Birds just posted the same thing.

Anyway, you can do single leg work to bring the left up to par.

I had to do that back in the day of trying to get bench weight up. Trained left side to stop right compensating.

That or stick to a weight both legs can comfortably drive with and slowly increase weight until they are synchronized.

If used to do it on 40kg but now that she has surpassed that (making left leg stronger), it doesn't. It wasn't doing it on 50 recently but I'd say muscle tiredness is likely responsible for this particular incident.

01/05/14

Deadlift

60kg x 10

80kg x 5

100kg x 1

110kg x 1

80kg x 10

80kg x 10

Bench Press

20kg x 10

30kg x 5

40kg x 3

47.5kg x 1

40kg x 7

Bicep Curl

10kg x 10

15kg x 10

20kg x 5

20kg x 5

20kg x 3

Push-ups

20

Ab work

05/05/14

Squat

20kg x 10

40kg x 10

50kg x 5

60kg x 1

62.5kg x 1

50kg x 10

40kg x 10

40kg x 10

Pause Squat

40kg x 5

Lat Pulldown

30kg x 10

40kg x 10

45kg x 10

50kg x 10

55kg x 7

60kg x 3

65kg x 1

Seated Row (cable)

30kg x 10

35kg x 10

40kg x 10

45kg x 5

50kg x 4

55kg x 2

Captains Chair

40

30

30

09/05/14

Deadlift

60kg x 10

80kg x 5

100kg x 1

112.5kg x 1

90kg x 5

80kg x 10

80kg x 10

Bench Press

20kg x 10

30kg x 5

40kg x 3

50kg x 0

45kg x 2

40kg x 8

Bicep Curl

10kg x 10

15kg x 10

20kg x 5

20kg x 4

20kg x 4

Decline Ab Crunch with 5kg plate

10

10

10

Hanging Leg Raises

10

10

10

Pull-ups

2

12/05/14

Squat

20kg x 10

40kg x 10

50kg x 5

60kg x 0

60kg x 1

65kg x 1

50kg x 10

50kg x 5

Lat Pulldown

30kg x 10

40kg x 10

45kg x 10

50kg x 10

55kg x 7

60kg x 3

65kg x 1

Seated Row (cable)

30kg x 10

35kg x 10

40kg x 10

45kg x 5

Ab work

You women are all the same lol

Couldn't just say thanks, had to play it down.

Just accept the damn compliment :D

I did 25 reps of squat with a massive 25kgs on the weight belt last night and my back did not explode, awww yeah.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...