Jump to content
SAU Community

Recommended Posts

So I was on Parramatta Rd today looking at some GTR's when I noticed a beautiful white Series 8 RX7 sitting in the lot. I sat in it and was instantly reminded of the MX5, with it's cockpit-like interior and snappy gearbox.

I've always been fond of the RX7, however I am hesitant to buy anything with a rotary due to hearing bad things and having no experience with them. However, all I would ever want is to buy one completely stock and not even touch it, so really, how unreliable could it be?

Keen to hear your thoughts and experiences on the VIII RX7 and just rotaries in general.

Link to comment
https://www.sau.com.au/forums/topic/429501-i-kind-of-want-to-buy-an-rx7/
Share on other sites

I did a bit of research on these before and it seems like if you keep the series 8 near to stock then they are a great car. If you go for an early series FD then there are a few things that need to be modified to make even stock ones reliable. Although by now, after 20 years of use, I imagine even the early ones would be sorted out.

At the end of the day if you do blow a motor you can get a kit from the US to stick an LS1 in there and they only weigh a little bit more than the rotary.

Just make sure you put NO2 bottles in a secret compartment under the seat so that for 10 seconds or less you can be free :P

  • Like 1

I know a guy thats been racing stock series 7 or 8 rx7's for years at targa and club days and never had any reliability issues. All comes down to how well they have been maintained and luck.

How much would it cost to rebuild a rotary anyway?

I had a series 8 for a few years and never had any major issues with it at all. The engine remained stock but it did get driven pretty hard. It did the 600km run from Perth to Kalgoorlie at least half a dozen times without it missing a beat.

That being said, they are the kind of car that loves to be driven hard, so finding an unmolested one will not be that easy. Whatever you do, do not believe the odo on these cars, a massive amount get wound back.

Someone called?

Rotaries are awesome and don't let anyone tell you otherwise - I have 2!

If the engines are looked after, built well (if modified), treated properly, warmed up etc. they are definitely reliable.

I have an FD 5-speed in one of my rotangs running ~375rwkw on pump fuel and it holds up and shifts well, doubt it could take much more but I don't think you'll be pushing that with your normal 13BT.

Someone called?

Rotaries are awesome and don't let anyone tell you otherwise - I have 2!

If the engines are looked after, built well (if modified), treated properly, warmed up etc. they are definitely reliable.

I have an FD 5-speed in one of my rotangs running ~375rwkw on pump fuel and it holds up and shifts well, doubt it could take much more but I don't think you'll be pushing that with your normal 13BT.

you have two? is that so whilst one is being repaired you can drive the other? (jokes)

Someone called?

Rotaries are awesome and don't let anyone tell you otherwise - I have 2!

If the engines are looked after, built well (if modified), treated properly, warmed up etc. they are definitely reliable.

I have an FD 5-speed in one of my rotangs running ~375rwkw on pump fuel and it holds up and shifts well, doubt it could take much more but I don't think you'll be pushing that with your normal 13BT.

But that's your only "running" rotary innit?

It is but that's only because I bought my FC without an engine in it ;)

you have two? is that so whilst one is being repaired you can drive the other? (jokes)

:P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...