Jump to content
SAU Community

Recommended Posts

NOTE: SERIOUS BUYERS ONLY

Location: Mermaid Beach, Gold Coast, Q 4218

Car:

• 1994 Black R33 GTS25 Type-S

• Manual 5 speed

History:

• In 2004 by Special Vehicle Imports (QLD) with 50,000km. In the time I've owned

it I have traveled approximately 10,000km per year. When it had just clicked over

100,000 km, I had the timing belt and water pump replaced. It is serviced

by Chapman and Chapmans every 10,000 km and I change the oil, oil filter and

inspect the spark plugs myself every 5,000 km in between.

Wheel/Suspension/Brakes:

• Sparco Racing rims 235/45 R17 with 4 new tyres (99%

tread)

• Whiteline springs with modified circlip height adjustable Bilstein shocks

(Sydneykid spec)

• Whiteline fixed front and adjustable rear swaybars

• Whiteline adjustable front and rear camber bushes

• Whiteline adjustable front castor bushes

• Whiteline pineapples

• Nismo front strut brace with master cylinder stopper

• R33 GTR rear strut brace

• Locked hicas

• R32 DBA slotted rotors and calipers (rebuilt) front with Hawk ultimate brake

pads

• R32 stock rotors and calipers rear (rebuilt) with Hawk ultimate brake pads

• ADR approved front and rear braided brake lines with Motul RBF600 fluid

Drivetrain:

• R33 GTR clutch

Power:

• Coby extractors with HPC coating, 2.5" high flow metal cat and a 3" Xforce Varex Remote Control Muffler

• Apexi SAFC-II (Black version) tuned by Matt Spry

Cosmetics:

• R34 GTR bucket seats (Incl. Modification Plate)

• Stealth rear wing

• Nismo tinted side indicators

• Tinted windows

Extras:

• CD Headunit

• Pioneer 6.5" front speakers and Pioneer 6x9" rear speakers in a custom MDF shelf

• Australian approved 3+1 immobilisation point $1000 aftermarket alarm system

(installed by Chris Rogers, will disclose if buyer is serious)

PM or Call me on: 0421714892

post-117252-0-27342400-1375332784_thumb.jpg

post-117252-0-26288700-1375332797_thumb.jpg

post-117252-0-36657900-1375332813_thumb.jpg

post-117252-0-21238000-1375332940_thumb.jpg

post-117252-0-32325900-1375333038_thumb.jpg

post-117252-0-91296700-1375333161_thumb.jpg

Edited by r33_gts1
Link to comment
https://www.sau.com.au/forums/topic/429583-1994-r33-gts-series-1-non-turbo/
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...