Jump to content
SAU Community

Recommended Posts

NOTE: SERIOUS BUYERS ONLY

Location: Mermaid Beach, Gold Coast, Q 4218

Car:

• 1994 Black R33 GTS25 Type-S

• Manual 5 speed

History:

• In 2004 by Special Vehicle Imports (QLD) with 50,000km. In the time I've owned

it I have traveled approximately 10,000km per year. When it had just clicked over

100,000 km, I had the timing belt and water pump replaced. It is serviced

by Chapman and Chapmans every 10,000 km and I change the oil, oil filter and

inspect the spark plugs myself every 5,000 km in between.

Wheel/Suspension/Brakes:

• Sparco Racing rims 235/45 R17 with 4 new tyres (99%

tread)

• Whiteline springs with modified circlip height adjustable Bilstein shocks

(Sydneykid spec)

• Whiteline fixed front and adjustable rear swaybars

• Whiteline adjustable front and rear camber bushes

• Whiteline adjustable front castor bushes

• Whiteline pineapples

• Nismo front strut brace with master cylinder stopper

• R33 GTR rear strut brace

• Locked hicas

• R32 DBA slotted rotors and calipers (rebuilt) front with Hawk ultimate brake

pads

• R32 stock rotors and calipers rear (rebuilt) with Hawk ultimate brake pads

• ADR approved front and rear braided brake lines with Motul RBF600 fluid

Drivetrain:

• R33 GTR clutch

Power:

• Coby extractors with HPC coating, 2.5" high flow metal cat and a 3" Xforce Varex Remote Control Muffler

• Apexi SAFC-II (Black version) tuned by Matt Spry

Cosmetics:

• R34 GTR bucket seats (Incl. Modification Plate)

• Stealth rear wing

• Nismo tinted side indicators

• Tinted windows

Extras:

• CD Headunit

• Pioneer 6.5" front speakers and Pioneer 6x9" rear speakers in a custom MDF shelf

• Australian approved 3+1 immobilisation point $1000 aftermarket alarm system

(installed by Chris Rogers, will disclose if buyer is serious)

PM or Call me on: 0421714892

post-117252-0-27342400-1375332784_thumb.jpg

post-117252-0-26288700-1375332797_thumb.jpg

post-117252-0-36657900-1375332813_thumb.jpg

post-117252-0-21238000-1375332940_thumb.jpg

post-117252-0-32325900-1375333038_thumb.jpg

post-117252-0-91296700-1375333161_thumb.jpg

Edited by r33_gts1
Link to comment
https://www.sau.com.au/forums/topic/429583-1994-r33-gts-series-1-non-turbo/
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...