Jump to content
SAU Community

Diy Guard Roller

D.I.Y. Mik

By D.I.Y. Mik,
in Fabrication

 Share

Recommended Posts

D.I.Y. Mik Veteran

D.I.Y. Mik

Posted
Posted

Invented my own guard roller. Made from junk.

Saw other ones are an adjustable arm on a plate. but more complicated than mine.

Need to finish coat, maybe yellow. May put a longer roller on if i find one.

It has adjustable angle, more than youd need both ways.

Also adjustable length, by 10mm increments, total 60mm, not much, but good for skylines.

post-89755-0-76219600-1376476197_thumb.jpg post-89755-0-98851300-1376476214_thumb.jpg

Designed for one handed operation, cos you need a heatgun in the other.

I havent tried it yet, as the garage is occupied. I will update when i try it.

Link to comment
https://www.sau.com.au/forums/topic/430256-diy-guard-roller/
Share on other sites
r31slpr Rising Star

r31slpr

Posted
Posted

Looks pretty good, simple but effective.

What wheel did you use?

What about using a hard skateboard wheel?

Or something from a trolley jack? They are usually metal, but occasionally you can find them with metal inner and a plastic/pu coating

D.I.Y. Mik Veteran

D.I.Y. Mik

Posted
  • Author
Posted

Wheel looks like its from some kind of garden tool, plastic.

Trolley jack wheel is what i originally thought would be best, nice and long.

The wheel ive got is about 40 50 mm. i need about 100mm. but small diameter. a roller.

If you see the pics of bought ones they have a nice roller...... like a trolley jack.

Or 2 skateboard wheels together.... hmmm

post-89755-0-47091500-1376824753_thumb.gif

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • GTSBoy
      R33 GTR running -9 with no tune

      By GTSBoy · Posted

      So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
×
×
  • Create New...