Jump to content
SAU Community

Recommended Posts

Purchased my r33 just under two weeks ago, all is good except recently i've noticed it's really difficult to put the car into 1st gear and reverse at times especially when the car is rolling (obviously i dont put it in reverse while rolling forward) i'm not sure if its always keen like this or if i've only just realised.

Link to comment
https://www.sau.com.au/forums/topic/430270-r33-gtst-clutchgearbox-problem/
Share on other sites

just the way they can be. as long as it goes in when stopped without any major resistance then all is fine.

def recommend to change the gearbox and diff oils for some new quality stuff as most skylines have this neglected and can really benefit from it, you'll probably get a far smoother shift and better longevity from your driveline.

#@34GeeTeeTee the pedal feels fine, engages about half way down. when i'm stationary it's easy to move into gear, it's only really when in motion that it seems to be a problem have to put a bit of force into putting it in first.

and this is a noob question but where do i check the clutch fluid level? do i have to bleed it before refilling it or anything?

#@34GeeTeeTee the pedal feels fine, engages about half way down. when i'm stationary it's easy to move into gear, it's only really when in motion that it seems to be a problem have to put a bit of force into putting it in first.

and this is a noob question but where do i check the clutch fluid level? do i have to bleed it before refilling it or anything?

In the engine bay you will see the little rezzy near the brake fluid... the brake fluid is a bright yellow cap and the clutch i think should be a black rubbery type cap! Just take it off being careful not to spill any fluid on paintwork and see what it looks like, you should actually be able to see the level without taking the cap off but i would check the condition anyway as its more than likely due for a full flush as most get neglected!

When are you trying to put it in first while in motion? Not something you need to do too often?

just getting a feel for the car really, it's the first manual i've actually owned so its kind of just a learning process for me at the moment

Fair enough! Well if you have any mates with them or know people that drive them get them to have a quick test drive and put your mind at ease!

It could be perfectly normal and you are worrying for no reason, you could have an issue.... Hard to tell from interstate lol

Let us know how you go with it and enjoy the car man!

  • 2 weeks later...

Its a manual!

how many manuals do you know that are easy to get into 1st n reverse when the car is moving?

iv owned 8 manuals and 6 you couldn't get 1st or reverse if the car was moving. Also 2 R33s, 1 you couldn't n 1 you just barely can. Its normal as long as it goes in without crunching when stationery. N yes, sometimes it can even be hard to find reverse.

Its a manual...

:)

Good grief. I have a gearbox that was so reluctant to shift when it was first installed that it wouldn't actually engage any gears at all until we drained the normal oil out and put shockproof in it. That gearbox still likes to snick and crunch a little bit going up or down into the middle gears. And that gearbox is perfectly able to be shifted into first with the car moving at quite decent forward speed.

Does no-one know how to rev match anymore?

The car wont go into reverse while rolling because there is no synchro on this gear. Its not something you should really ever be doing anyway wether your travelling in forward or reverse. If your on a hill, put it in reverse BEFORE starting to roll backwards.

as for 1st, as already quoted, It's not the easiest gear to get in, usually you have to be travelling at a lowish speed or rev match as GTSBoy said. Mine shifts into first alright at around 15-20km/h (not 100% sure what speed as its usually when pulling up to stop or slow to near stop)

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...