Jump to content
SAU Community

Recommended Posts

Can anyone shed some light on what the next steps should be?

I was thinking

-hook up jumper leads and do another test.

-pull off the timing cover and check the belt

Then if stinky comes around this week.

-Try a new VCT unit just in case if he has one.

Anything else?

yes that is what I would do.

Redo the compression test while hooked to a running engine by jumper leads

When stinkypoo drops by, swap the ignitor, CAS, AFM and ECU (one by one) and see if it makes a difference.

If still crappy results and no luck, take the timing cover off.

Timing cover is like...3 bolts isn't it? The upper half of it at least. It'd take no time to pull off and look at the belt, should be blindingly obvious if that's the problem lol.

I'd check the things that take the least time to do first.

true. I'm not sure how much work it is on a stock 25...on a 26 it needs CAS off, water line disconnected (possible re-bleed) and then about 3 bolts. not a big deal. You should either carefully mark the CAS position before removing it, or redo the base timing after.

Yeah so I can't swap out an ECU which is a bit of a pain because its a nistune R32 ECU.

Using the Window switch (Not the jaycar one) its the proper window switch.

Checked that last night and it seems fine.

Rob pulled out the ecu and re connected just to be sure.

Yeah I will re run the test tonight hopefully ( is it okay to use a jump start pack thing?)

If it's easy to pull the cover off then I will check that as well.

Hopefully stinky has time to stand in the dark and cold with me and try a CAS or maybe even see something I am not noticing.

Daniel - pm your addy and I'll drop around a fully charged Battery, a Jump Pack and Jumper leads after work.

Edit: Oh and a battery charger :)

If tonight was like last night maybe drop off a few jumpers as well :P

LONG LIVE THE RB!

So I had a few of the locals come around tonight. Shout out to "Stinky Poo, Sinister & Wilderboy"

They brought along a jump starter and we decided to do another comp test with a starter pack giving it power.

Cyl 1 = 95

Cyl 2 = 90

Cyl 3 = 80

Cyl 4 = 105

Cyl 5 = 95

Cyl 6 = 100

Sat around and pondered the idea about costs doing an engine swap or just giving up on the dream

But Stinky Poo (Don't want to f**k up the spelling to your real name) Decided he wanted to put it back together and give it one more chance.

We put everything back in and back together and the farken bitch started first go!

Didn't even miss a beat!

Right now I'm left scratching my head as to why the compression is still so low (could it be possibly the tester itself?)

and left wondering why the car just decided to start again for no reason.

Leaves me worried I'm going to get stranded somewhere I don't want to be.

My next step is maybe take it to a workshop for them to triple check everything.

  • Like 1

Thanks to everyone for all the help over the past few days!!
I really really really can't thank you all enough!

Glad this didn't make it to page 10

Long live the RB!

And yes a warm/hot test will be a good comparison because it can be lower when cold right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...