Jump to content
SAU Community

Flat Spots In Rb25De Neo

shaunconnors34
 Share

Recommended Posts

iseekool Veteran

iseekool

Posted
Posted (edited)

Sounds like a vacum leak. Check all your signalling hoses/vacum lines for splits and cracks. Also brake booster and variable length intake actuator diaphram for breakage/busted seal.

Edited by iseekool
  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Mr Roux
Mr Roux

I've got the same problem in my r32 rb25de, happens when it's cold but when it warms up abit it's not there/ hardly noticeable. I'm leading towards an over fueling issue Wonder if anybody else has h

Posted Images

shaunconnors34 Apprentice

shaunconnors34

Posted
  • Author
Posted

Yeah I've tried a different afm also a different tps sensor hoping that that would solve the issue but no luck. I would have gone the cheaper plugs but yeah as Neil said just getting to the plugs is a bitch the whole intake pretty much has to be unhooked and taken out. Which isn't a fun job at all. Hopefully this afternoon when I get the car back they will have found out the issue.

shaunconnors34 Apprentice

shaunconnors34

Posted
  • Author
Posted

So turns out the plugs were causing timing issues with both my tps sensor and my ignition timing which was throwing out my timing in general, causing flat spots. But in all that with a dyno run a tune and new plugs cost me a bit but it the car runs completely different to what it did before hand. Gained and extra 60kw atw from the run they did this morning. Pretty happy with these guys but it still feels like its missing while cruising which is driving me insane... Going to give what iseekool said ago on the weekend to see if that makes it runs 100% :)

mad082 Grand Master

mad082

Posted
Posted

60kw gain? It must've been running like an absolute slug before it went in, since that's about half the stock power output. My guess is today they dodged the dyno results somehow. But as long as it drives better then that's a bonus.

iseekool Veteran

iseekool

Posted
Posted

Yeah well it was running like crap mums gt 86 was beating me in a straight line which was just embarrassing to be honest.

A GT86 is quicker than an n/a R34. I don't see what you are getting at here. LOL :P

GTRsean Grand Master

GTRsean

Posted
Posted

I'd put in a fresh o2 sensor in too, helps during cruise and for fuel economy.

Old injectors can cause issues too with slight misses at light throttle inputs. A friend and I have experienced that. Cleaning them usually won't help due to age/wear and tear.

shaunconnors34 Apprentice

shaunconnors34

Posted
  • Author
Posted

Ahhh okay thankyou will do. Any chance you would know anywhere that sells standard injectors. I shopped around a while back but could only get turbo ones which were something like 600cc from 999...

shaunconnors34 Apprentice

shaunconnors34

Posted
  • Author
Posted

Thats a good idea I'm gonna have to have shares with the Commonwealth to buy the injectors from them but hopefully it'll work thanks. Was just hoping to get some new ones really anywhere apart from nissan:-/

  • 1 month later...
shaunconnors34 Apprentice

shaunconnors34

Posted
  • Author
Posted

So for future reference if anyone has this issue. It ended up being my "tps sensor". It was tested by an auto electrician and everything was working as it should right voltage etc. I managed to get one off a car someone was wrecking and car runs fine now.

Deza3000 Proficient

Deza3000

Posted
Posted

Im just curious, how much rwkw you running now in total? Cause a standard N/a skyline is roughly 90 - 100rwkw, gaining 60rwkw would mean you were running 40rwkw before? Unless you are putting out more than factory?

  • 3 weeks later...
shaunconnors34 Apprentice

shaunconnors34

Posted
  • Author
Posted

Total is 163.4 from memory. Made a massive difference after the tune when it was done. It was like driving a completely different car power wise. When I chnaged the Tps sensor over I put the connection as far down as I could as the further I moved it up the more the car reved and it hasn't played up once since I've done so. And its a manual transmission :-) couldn't make myself get an auto:-P

  • 4 weeks later...
Silver Nissan Rookie

Silver Nissan

Posted
Posted

Hello I'm new to skylines Australia. I have a very similar problem atm with my rb25de neo

When in get up in the rpm say at 3500rpm there is a flat spot for a second then after the flat spot it picks up again

It's kinda like it's not getting enough fuel but i have a few things I got to look over but I just need someone else's input to help me. Ty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...