Jump to content
SAU Community

Recommended Posts

Sounds like a vacum leak. Check all your signalling hoses/vacum lines for splits and cracks. Also brake booster and variable length intake actuator diaphram for breakage/busted seal.

Edited by iseekool

Yeah I've tried a different afm also a different tps sensor hoping that that would solve the issue but no luck. I would have gone the cheaper plugs but yeah as Neil said just getting to the plugs is a bitch the whole intake pretty much has to be unhooked and taken out. Which isn't a fun job at all. Hopefully this afternoon when I get the car back they will have found out the issue.

So turns out the plugs were causing timing issues with both my tps sensor and my ignition timing which was throwing out my timing in general, causing flat spots. But in all that with a dyno run a tune and new plugs cost me a bit but it the car runs completely different to what it did before hand. Gained and extra 60kw atw from the run they did this morning. Pretty happy with these guys but it still feels like its missing while cruising which is driving me insane... Going to give what iseekool said ago on the weekend to see if that makes it runs 100% :)

60kw gain? It must've been running like an absolute slug before it went in, since that's about half the stock power output. My guess is today they dodged the dyno results somehow. But as long as it drives better then that's a bonus.

Yeah well it was running like crap mums gt 86 was beating me in a straight line which was just embarrassing to be honest.

A GT86 is quicker than an n/a R34. I don't see what you are getting at here. LOL :P

I'd put in a fresh o2 sensor in too, helps during cruise and for fuel economy.

Old injectors can cause issues too with slight misses at light throttle inputs. A friend and I have experienced that. Cleaning them usually won't help due to age/wear and tear.

Ahhh okay thankyou will do. Any chance you would know anywhere that sells standard injectors. I shopped around a while back but could only get turbo ones which were something like 600cc from 999...

Thats a good idea I'm gonna have to have shares with the Commonwealth to buy the injectors from them but hopefully it'll work thanks. Was just hoping to get some new ones really anywhere apart from nissan:-/

  • 1 month later...

So for future reference if anyone has this issue. It ended up being my "tps sensor". It was tested by an auto electrician and everything was working as it should right voltage etc. I managed to get one off a car someone was wrecking and car runs fine now.

Im just curious, how much rwkw you running now in total? Cause a standard N/a skyline is roughly 90 - 100rwkw, gaining 60rwkw would mean you were running 40rwkw before? Unless you are putting out more than factory?

  • 3 weeks later...

Total is 163.4 from memory. Made a massive difference after the tune when it was done. It was like driving a completely different car power wise. When I chnaged the Tps sensor over I put the connection as far down as I could as the further I moved it up the more the car reved and it hasn't played up once since I've done so. And its a manual transmission :-) couldn't make myself get an auto:-P

  • 4 weeks later...

Hello I'm new to skylines Australia. I have a very similar problem atm with my rb25de neo

When in get up in the rpm say at 3500rpm there is a flat spot for a second then after the flat spot it picks up again

It's kinda like it's not getting enough fuel but i have a few things I got to look over but I just need someone else's input to help me. Ty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...