Jump to content
SAU Community

Recommended Posts

Hi Ramor,

What kind of ECU is in your car?
I'm assuming it's an R32 GTST?

Do you have any mods which you're looking to take advantage of?


Northern Suburbs, I'd probably be going to Chasers Motorworks in West Melbourne http://chasers.com.au/

or if you're willing to travel to the South East, Chequered Tuning in Keysborough http://www.chequeredtuning.com

  • Like 1

Yeh Barry is great, and they also have an in house tuner that has done all of my cars. Definitely recommend them.

as this bloke said... very prifessional and cihan is a legend n very patient when tuning... lets jus5 say from my exoerience and 5k later, better then chasers

  • 3 weeks later...

Lucky for you Chasers isn't too far out of your way.

My 300kw Skyline is Tuned by them. Paul is an engineer, and tunes everything from Skylines to Helicopters to desert super buggies and time attack machines plus accounts for elevation changes in hill climb machines.

After having it tuned: I run full boost flatstick during my trackdays at Phillip Island and the tune is spot on. Can't say the same for my brakes however, they're completely toast -Incl warped rotors front and cracked rotor rear left.

Even managed to Spin off at 200km/hr (GPS verified). Car was a beast.

Summary: Can't go wrong with Chasers. I ended up using them because at the time I needed someplace close to the CBD so I could get to work after dropping it off. I didn't see Chasers mentioned much on these forums hence wasn't my first choice.

Now I wouldn't use anyone else.

Northern suburbs...Rajab Racing Developments. He is the RB master. And Alan is the nicest and fairest guy you will ever meet. Just take your car down there and have a chat to him you will see what I mean. 93577587

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...