Jump to content
SAU Community

Recommended Posts

Hi guys and girls, anyone have any ideas what could be causing my stagea to run rough? Sounds like it's running on 5 but tacho says it idles steady, it still makes boost but slowly, feels like it goes good once the boost kicks in. Just changed the plugs and coilpacks and all the plugs look the same, no fouling etc. Wondering if it could be fuel filter or boost leak or afms, or fpr? Just had fuel pump done too. Also has a bit of backfire on gear changes

Link to comment
https://www.sau.com.au/forums/topic/432543-help-rb26-sounds-like-a-wrx/
Share on other sites

Just because the tacho is stable doesn't rule out a cylinder missing. With car running disconnect one coil pack at a time, in no time you will know which pack/plug/part of loom is dodgy

  • 1 month later...

Ok guys, replaced the plugs, replaced the packs with splitfires and just put in a new coilpack loom, still sounds like it's missing and smells rich plus is very laggy and won't make full boost, could it be an injector?

Just because the tacho is stable doesn't rule out a cylinder missing. With car running disconnect one coil pack at a time, in no time you will know which pack/plug/part of loom is dodgy

Did you do this? Or just replaced stuff for fun? Narrowing it down to a cylinder would have helped you determine if it was a coil pretty easily.

I replaced things that seem to cause common problems so I don't have to worry about it again for a while. It used to come and go so I had ruled out mechanical problems as I would think damaged piston or cylinder would be more permanent.

If it is intermittent there is a good chance one or both of the AFM's needs re-soldering, there is a 'how to' around on fixing them if you do a search.

It could be an injector too, would be a good idea to get them cleaned and flow tested just to rule them out.

I was just pointing out that trying to diagnose such problems over the net is near futile. It always turns out to be something either very obvious or nothing that anyone thought of.

So tempted to put that in my signature.
  • Like 1

When I bought it they did a compression test and has only done about 5000k since then so no I haven't plus cause it was come and go I didn't think it could be that. Happened around when the alarm went in, imobiliser issue maybe?

Wouldn't surprise me if its an afm.

Another quick thing to do would be check over all of the I/C piping and joiners for a leak and vacuum lines too

Edited by Even_Flow

Pull injector plugs one by one until one doesn't make it any worse than it is already. Once you find the cylinder that is missing check the plugs/coils/loom for that cylinder.

Could even use a screwdriver to the ear to find which one is missing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...