Jump to content
SAU Community

Recommended Posts

I've had a search around in the forum and on google and can't seem to find a great deal.

I've got a 32 GTR with a twin Kakimoto system on. I hate the twin cannon rears and it's a touch on the loud side. So I'm going to change the twin 70mm to a single 100mm before the rear muffler and fit a single oval 100mm muffler.

Basically I've spoke to a few muffler shops who said they couldn't get hold of a stainless one. I've done some searching myself and spoke to Xforce, they do one, but I can get a Borla or a Magnaflow for similar money from the states.

I'm a Pom and haven't heard of Xforce as we don't really get then over there. I'm just making sure they're not cheap crap because if they are I'll go for the magnaflow/Borla option

Cheers

Chris

Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/
Share on other sites

I changed my 4 inch catback to a 3 inch catback with an x force mid and rear muffler. 4 inch was overkill and the sound was ridiculous.

I also have a 3inch turbo to cat. (HKS off the shelf whatever)

The muffler shop said it would be much more restrictive however I made the exact same power. I was expecting to lose some boost in the top end and maybe some response, but nah its the same shit.

so +1 for xforce from me

Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/#findComment-7072232
Share on other sites

There is very little difference in any of the straight through muffler designs from my experience. It's just a perforated pipe with packing at the end of the day. Go as large as you can with the muffler body to reduce decibels, and don't go larger than you need to in pipe size.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/#findComment-7073127
Share on other sites

I was running a 3 1/2inch system with a 3inch Xforce oval muffler, before that I had a 4inch nurspec ( bloody noisy), fujitsubo( quiet but 2inch restrictor) and I found the Xforce muffler great for flow and noise was perfect.

Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/#findComment-7073586
Share on other sites

I bought second hand, and got a mild steal 3" bell-mouth dump for $60 and a stainless 3" cat-back with a large oval mid, and at the diif it ups to 3-1/2" with a short cannon for $200.

Then I bought a new catco 3" flanged cat for $175 off KMS

= brilliant quiet system for a grand sum or $435...

at least look at S/H options before you spend thousands

Link to comment
https://www.sau.com.au/forums/topic/433698-xforce-mufflers/#findComment-7074292
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...