Jump to content
SAU Community

Recommended Posts

Hey guys,

This is my first post so hopefully ive put it in the right section.

Ive tried searching everywhere for the replacement brake rotor/Pad part numbers for my 2008 V36 type S (355mm) but cant find anything.

Ive downloaded the DBA catalogue and the 370GT/G37 are not listed so do not have a clue where i can get ANY. The local brake guys in Canberra are hopeless and give me a stupid look when i ask for rotors for a 370GT. I dont want to have to go through the US to grab any so hopefully someone out there knows what the numbers are.

I`m after T2 or T3 front and rear and also EBC Pads, but cannot find any details.

Greatly appreciated if anyone knows what the parts numbers are and can help me out.

.

Cheers in advance

Mick

Link to comment
https://www.sau.com.au/forums/topic/433769-v36-brake-rotor-part-numbers/
Share on other sites

Try looking at the products for the Nissan 370Z. They should be the same

Can confirm the part numbers by checking the DBA US catalogue and seeing if the numbers match with the 2008 Inifiniti G37 sport

I'm trying to find rotor and pad part numbers for 2007 V36 350GT Sedan SP...the sedans sports has the 13" front and rear....can hardly find anything except Stoptech...was hoping to get some DBA T3s...might just bite the bullet and get the Akebono BBK Kit...

Good luck mate, I have a 2008 also and find it near impossible to get reliable part info online. I keep getting two different answers on parts I've been looking for with drastically different prices. I decided to bite the bullet and pay extra through Nissan. At least if the parts wrong, I'm not stuck with it.

I can only find Stoptech ones that will definitely fit...both 13" but one is thinner than the other.

How much did you pay Nissan for the rotors and pads? I am thinking of getting the Akebono BBK if the OEM/Stoptech route is too expensive.

What xfuzion said.

Jump on the US DBA site and look up the Infiniti G listings. You can then get your local supplier to order the exact same DBA code since they're all made here anyway, according to an Australian DBA rep about 5 years ago.

Thanks for the help guys. Brakes all sorted.

Next thing though.... The wife also has a 370GT but it is only the standard car. The other day the brakes started grinding a little at the front and now need replacing.

So, does anyone know where i can get replacement pads and rotors for a standard 370GT (rotors are only 330mm) front and rear?

Nissan australia have quoted $1500 for just replacement rotors and pads (front and rear) Have jumped on Google and there is absolutely nothing. DBA USA dont even have a listing for them and no one seems to have any for this model.

Alternatively, measure the brakes (diameter and width) and call DBA direct. Ask them to look up the specs for the 370z and see if they are the same dimensions. If so, you can just order them. I would be seriously surprised if they were different to 370z parts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...