Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

op, look at the smaller sized precision and hta turbos.

both offer great power and response for what you want.

if you have already started the swap, keep going.

if not, as suggested, stay with the vq, and get great throttle response, and power.

and less attention from the law.

Lol. Lmfao. Man this is a funny thread. I dont even know where to start help wise.

A gtx42 is way to big for your 500hp goal. GTX3582R would do the trick and leave room for a little more.

Good luck and search it really helps.

Regardless of which turbo, this is still predicated on the assumption that he will take out a modern 3.5 litre aluminium V6 with a hell of a pedigree for a rattly old f**king RB that can trace its roots all the way back to the early '70s.

Now, I like my dirty old RBs......but you'd be a fool to think that dollar for dollar you would get anything better out of a transplanted 26 than you would keeping the VQ and slapping a turbo and some management onto it. You wouldn't even get "cred" for it as far as I am concerned. It's already been done, therefore it's not even "different". Just foolish.

^^ This.

Unfortunately the VQ35 isn't much chop in stock form, the bottom end is just too fragile, but for the cost of the planned swap it could be a built... Overnight parts from Japan.

Or just drop a VQ25det in there, will take 500hp stock.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...