Jump to content
SAU Community

Recommended Posts

Has anyone tried these new momo tyres? Momo Outrun M3. >>> http://www.momotires.it/en/summer-tires/outrun-m3.html

I'm hesitant in buying a pair (for the front) because I cant find a single review.

They've only just come into the market.

treadwear 280

Why do I care? Because they are priced so ridiculously cheap. I'm hoping price is not based on their quality, but rather because they're new to the market.

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

I wish i knew as well. It's either these or Nittos for me, and the Momos are priced very cheap at the moment because they are new.

We might have to be the first to test because i really need 2 for the front! I will be going to get them next week somewhere off of the M5 before the tunnel.

I just got a pair fitted this morning. $250 for the pair in 225/40/18 at St.George Tyres in Arncliffe. The guys there are pretty damn helpful.

I replaced 235/40/18 Falkens with them. The Momo dont come in 235 and the 245's would have scrubbed.

I didnt want to go down in size, but when they measured the tread width, it turns out the 225 Momo are actually a touch wider than the 235 Falkens.

So they look and fit just right. No stretch now, compared to the Falkens.

No strange vibrations or anything of that nature that you would see immediately with a crappy tyre. The tread pattern looks good. The tyre quality seems good. Not that its saying much at this stage.

Interested to see what they handle like in the wet.

They are definitely quiet (if that's important to you), and surprisingly comfortable.

I'll report back here after ive had them for a while.

update. yes it does say 'made in china' on the tyre in microscopic lettering.

ive been driving in the rain, and after-rain wet slick road surfaces over the last 2 days. momo m3's on the front.

these tyres grip very well in wet conditions.

there was no sign of any slip or aqua planing.

the front gripped really well in the bends, corners, and straights.

obviously i'm not pushing them to their limits in the wet on the street.

but so far, i'm really happy with these tyres, and for the price, they seem unbeatable.

hopefully they hold up well over time.

No complaints here!

they were fitted at 35psi, but felt a little 'dull' in respect to feedback. so I'm running these at 40psi (which i usually do up front anyway).

theyre definitely comfortable at 40 though. They absorb the bumps well. Still quiet, from what i can tell over my engine/exhaust noise anyway.

feedback is good, response is sharp enough. grip is great.

  • 3 weeks later...

after using these tyres for a while now. I'm going to say they are fkn brilliant!

grip grip grip! comfort. excellent response and sharp turn-in.

ive pushed these fairly hard in the wet, dry, cold, hot, dusty (ahh sydney weather!)

better than ku31. def better than mid range falkens. better wet grip IMO than nitto 555's.

that's all i can compare them to. Oh and better than achilles, obviously.

i'm impressed!

That would be ace, I've had my Kumho 39's 205 55 16's on for about 9 months now and rate them highly, especially in the wet. Their only flaw is the sidewall could be stiffer, as sharp changes of direction feels a little mushy, but that could be because of the 55 profile.

maybe increase pressure? the r33 has a shitload of weight over the front wheels, so i always run 40psi for the fronts in 18's. not sure about the r32 with 16's.

and at lower pressure, these momo's can feel a bit mushy too. but right now, they feel fine, and not at all uncomfortable.

  • 4 months later...

yeah i have an update!

these tyres still feel great. not a single complaint from me.

still grip like new. feel like new. dont seem to have deteriorated much, if at all.

very pleased.

i only wish they came in more sizes, like 235/18 and 265/18.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...