Jump to content
SAU Community

Recommended Posts

A friend is putting one on his 2530 at the moment.

What we have found is the hall sensor when fitted with the supplied bracket fouls on the teeth on the balancer so we had to space the sensor down. (not ideal)

The supplied power steer pump pulley wont fit on the pump shaft 1mm to tight and it wont line up with the belt, we have tried Rb30,26 and 25 brackets.

The 26 one lines up but the shaft on the pump is splined not smooth like the 25 one.

Calling Ross or whoever now runs the company today to see why we have these issues.

I can assure these things work, it was designed on our car by Unigroup Engineering and Ross. I will admit that we only run the bottom half as its a 26 in an S14 and the CAS Sensor Ross designed wont fit in our car as its simply too bulky

We had around 500rpm worth of incorreect singnals in the upper rpm range and this fixed it straight away. It works a charm with the Link G4 that we run in the car.

I got one on my car as Ross has sponsored it to me. I can back them up they work a treat car now runs and tunes much smoother. More accurate at the higher rpm rev ranges around 10000+rpm, the car is punching out approx. 1200HP no dramas at all. I am running dual triggers one on Crankshaft and Camshaft with a Vipec V88 ECU, so far so good, I have only used it for one drag meet so far which was Brisbane Jamboree. So I haven't had much time to properly test it. But I did notice a fair few GTR's at WTAC where running these setup's so they must be doing something right.

Wow, huge difference. Surely that would have to aid longevity to remove the torsional vibrations that would cause.

What is the whole kit worth? Anyone know if you can buy just the sensors and sensor wheel? As in upgrade an existing Ross balancer.

I got the balancer trigger wheel sensor and braket and convertor box to change the signal to Nissan for $2000, and didn't use the box as I changed the computer to one that reads directly off the sensor, I believe the balancer that has the trigger wheel is different to the normal/older style one, google trigger wheel rb26 there are heaps of different setups avalible, I'm currently looking for a 24-1 tooth wheel to replace the 36-2

Please write down ross's finding or yours. sound not so good by your review :(

Dont get me wrong, I know the system works. It just isnt fitting.

Ross have sent an adaptor for the power steering issue, should get here by the end of the week.

would this work with a haltech without the expensive 600$ blackbox? At this point, my car is well-moded.. I just want to make it run smoother/safer etc.

Indeed it will. If you have a Pro Plugin go with the 12 tooth crank wheel. No converter box required.

Yeah E11 will decode almost any trigger setup, as will the Platinum Sport range.

As the Pro Plugins are designed as a plug and play application, they were locked to the standard trigger on the designated vehicle unless you requested specific firmware from Haltech. 24+1 is now a user selectable option across almost all Pro Plugin ECU's where the trigger type is a popular modification for that vehicle.

Here's the option as found in the R34 GTT Pro Plugin setup screen....

post-16325-0-66968500-1384909411_thumb.jpg

Wow, huge difference. Surely that would have to aid longevity to remove the torsional vibrations that would cause.

What is the whole kit worth? Anyone know if you can buy just the sensors and sensor wheel? As in upgrade an existing Ross balancer.

Ross upgraded our balancer when they designed the kit so i believe it should be a simple upgrade. It was a current balancer and was yet to be fitted to the engine though so dont know if this changes things

I guess you would need to call Ross and ask if they are all able to be upgraded

I have a few graphs below taken off my own car.

Nissan%20CAS.JPG

Timing graph with the OEM CAS

Crank%20Trigger.JPG

Ross trigger kit. That's using the 34 - 2 timing wheel.

Piggaz, that really does show how reliable and rock solid it can be. It makes a big difference to timing values when your signals are a lot cleaner and makes it that much safer to make decent power ;)

Edited by ido09s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...