Jump to content
SAU Community

Recommended Posts

How loud are they compared to the V8's? From what I can hear through the TV they sound considerably quieter.

V8's were significantly louder, though admittedly they were at full attack mode. Biggest sign was the rb7 doing a couple laps, sound was phenomenal in comparison, could be heard from miles away.

Possible glimmer of hope - the f1 app was showing that everyone was only taking the engine to around 12000rpm.

Doesnt mean that they werent going to 15000rpm, the app could be wrong. But if it isnt we might get a bit more of a scream out of the v6's yet

Why would you take it to 15,000? That's the question. You have 5 motors to last the season. You have a limited fuel delivery. You have a turbo that can be spun up electrically for boost at any revs. You have 8 gears to keep the motor in the torque range.

Why bother with 15k, if you don't have to?

Not saying I like it, just makes sense not to rev it for the sake of it.

Lets face it,they sound shit!But its the future.Old turbo 80s cars had no rev limit or boost plus had screamer pipes.Now its all used to make electricity,which acts as a huge muffler.Really its amazing how quiet they are for an engine with an exhaust straight out of the turbo.Ive always said that the two cars that actually go through your body is F1 and topfuel,but sad to say F1 no more???Whats the answer?I dont know.Im an electrician and im very impressed with the electric power they have but,mmmmmmm,think the live atmosphere is gone.And its only gunna get worse as they develop electric power more.I suppose on TV it wont be as bad as the racing itself will be good,but im sure crowds will be down in the future as most people that arent hardcore F1 fans only go to hear that beautiful sound of a V8 at 18000rpm with open exhaust,or dare i say the V10s at 20000rpm.BMW actually revved their V10 to 21000rpm on the dyno but the limit to race was 20000rpm then.Whats the answer guys???Times change...............

Why would you take it to 15,000? That's the question. You have 5 motors to last the season. You have a limited fuel delivery. You have a turbo that can be spun up electrically for boost at any revs. You have 8 gears to keep the motor in the torque range.

Why bother with 15k, if you don't have to?

Not saying I like it, just makes sense not to rev it for the sake of it.

All it take is one team to do it, and beat the rest. Then they'll all do it.

These guys ARE racing for sheep stations.

Possible glimmer of hope - the f1 app was showing that everyone was only taking the engine to around 12000rpm.

Doesnt mean that they werent going to 15000rpm, the app could be wrong. But if it isnt we might get a bit more of a scream out of the v6's yet

in the commentary theyve said that they will prob be racing at around 12-12.5k cause they wont make race distance with 15k :(

Lets face it,they sound shit!But its the future.Old turbo 80s cars had no rev limit or boost plus had screamer pipes.Now its all used to make electricity,which acts as a huge muffler.Really its amazing how quiet they are for an engine with an exhaust straight out of the turbo.Ive always said that the two cars that actually go through your body is F1 and topfuel,but sad to say F1 no more???Whats the answer?I dont know.Im an electrician and im very impressed with the electric power they have but,mmmmmmm,think the live atmosphere is gone.And its only gunna get worse as they develop electric power more.I suppose on TV it wont be as bad as the racing itself will be good,but im sure crowds will be down in the future as most people that arent hardcore F1 fans only go to hear that beautiful sound of a V8 at 18000rpm with open exhaust,or dare i say the V10s at 20000rpm.BMW actually revved their V10 to 21000rpm on the dyno but the limit to race was 20000rpm then.Whats the answer guys???Times change...............

I've raced RC, nitro and electric, NiCad, NiMH, Lipo, until you experience max torque from zero rpm, its difficult to comprehend the power of electrons. I actually wouldn't mind seeing an all electric version of F1. Though I would expect the next step to be hydrogen/ electric hybrid.

Don't get me wrong, if someone offered me a Tesla, mac650, or an R35 I would be like tesla who...

V8's were significantly louder, though admittedly they were at full attack mode. Biggest sign was the rb7 doing a couple laps, sound was phenomenal in comparison, could be heard from miles away.

I should have elaborated a bit more. I meant the super cars not the old F1's.

The old V8 F1 doing the speed comparison gave me goosebumps when it got on the noise after listening to this v6 garbage all day.

I've raced RC, nitro and electric, NiCad, NiMH, Lipo, until you experience max torque from zero rpm, its difficult to comprehend the power of electrons. I actually wouldn't mind seeing an all electric version of F1. Though I would expect the next step to be hydrogen/ electric hybrid.

Don't get me wrong, if someone offered me a Tesla, mac650, or an R35 I would be like tesla who...

You have heard of Formula E right?

Possible glimmer of hope - the f1 app was showing that everyone was only taking the engine to around 12000rpm.

Doesnt mean that they werent going to 15000rpm, the app could be wrong. But if it isnt we might get a bit more of a scream out of the v6's yet

Orly?

Interesting..

All it take is one team to do it, and beat the rest. Then they'll all do it.

These guys ARE racing for sheep stations.

Yeah, sure. But the way I look at it, the way the fuel is setup, you don't need the rpm to make the speed. You could use 15,000 to stretch a gear between corners, but really, all the torque and acceleration of these motors will be based in lower rpm. I suspect that's why they got an extra cog. We only got use to stratospheric rpm because of the NA motors.

I have the answer.

Too many cars sitting in sheds. Make a category for ex f1 cars, that gentleman drivers can come and complete in. De tune the engines a bit so they can last 1/2 a season or whatever. Give them a control tyre, and replace the porsche cup with them!!! Year catagories to keep a bit of parity.

I should have elaborated a bit more. I meant the super cars not the old F1's.

The old V8 F1 doing the speed comparison gave me goosebumps when it got on the noise after listening to this v6 garbage all day.

That's alright, that's what I was referring to as well! The supercar's sounded brilliant compared to the muted burps & farts from the f1's, the rb7 was on another level again. So in summery, sad panda.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...