Jump to content
SAU Community

Recommended Posts

why dont they have detection lines at flag points and cars hit rev limits that will see the cars slow and need to downshift and maintain 120km/h until then clear the flag point where the next green is shown.

Totally concur, with technology available why leave it to driver to judge lift when they know it leaves opportunity for another driver to lift less and catch them up, get them to select a flag mode. Obviously bit more complex than pit lane, possible multi flag sections require differing limits with transitions etc but they do have enough IQ & $s between them to work it out.

And Micky, put simply, you aquaplane because you exceed the rate the tyre can clear water - speed is definitely a variable

Yes hence why I said he needed wets, I think 65l per second vs about 30L for inters? Someone will correct me.

We don't know how quick he was going, the driver is considered to know the appropriate speed for the conditions. All great in hindsight.

Yes hence why I said he needed wets, I think 65l per second vs about 30L for inters? Someone will correct me.

We don't know how quick he was going, the driver is considered to know the appropriate speed for the conditions. All great in hindsight.

Inters disperse 25l per second brah

at the speed Jules went into the cul of that tractor I'd say he lost control of the car just as he went to turn and once the car slides in such conditions there is nothing a driver can can do

I feel for Jules though and his family right now.

Totally concur, with technology available why leave it to driver to judge lift when they know it leaves opportunity for another driver to lift less and catch them up, get them to select a flag mode. Obviously bit more complex than pit lane, possible multi flag sections require differing limits with transitions etc but they do have enough IQ & $s between them to work it out.

And Micky, put simply, you aquaplane because you exceed the rate the tyre can clear water - speed is definitely a variable

At the end of the day, with current technology a driver will ALWAYS be better in wet conditions. I have never seen a system like that that performs in the wet. It's always dangerous and would be worse in the wet.

Unfortunately the driver made a huge error and was going much too fast for the conditions. Such a horrible accident. But it's part of the sport, and it is bound to happen every now and then.

Don't know why they don't (some tracks do) just have cranes outside of the track that can literally pick the vehicle up and over the wall without going on the track. Make the whole recovery much faster and much safer.

Firstly I am not apportioning any blame to Bianchi in this accident...but I am wondering with technology what it is today why dont they have detection lines at flag points and cars hit rev limits that will see the cars slow and need to downshift and maintain 120km/h until then clear the flag point where the next green is shown.

Seriously the drivers tendency to speed through double waved yellows in V8 Supercars is terrible and F1 not much better. Has long frustrated me that FIA dont police it more heavily and a joke that in quali sessions drivers only need to demonstrate a lift of a tenth or two as acknowledging the yellow

Just need to deploy the safety car in the wet when the recovery vehicle is out. Double waved yellows is not enough.

looking at that gif, id be worried about the gap in the wall too, cause if truck wasnt there it almost looks like he would have missed the tyre wall and gone through the gap...

it was a horrible accident, rain fell, inters at the end of their life so prob dispersing less water, and a fast sweeping turn...

also the green flag surly shouldnt have been there

hmmmmaybe not, looks like the wall folds back, just not sure how far

Edited by MatthewT85

Sorry, i may have missed something, but why are people saying 'forza jules'?

Isn't he French? and driving for a Russian team?

Whats the relationship there?

Nando started it on twitter.

Edit for linky.

https://mobile.twitter.com/alo_oficial/status/518825831435489280

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...