Jump to content
SAU Community

Recommended Posts

i am reading the pre 1989 scheme for NSW. jsut want confirmation if that vin number is the model year. or the actual build date? i understand the pre 89 scheme only applies to cars built before jan 1 1989

The link you posted above shows that the first cars were produced in August 1989 so unfortunately your car won't fall into any scheme that applies to cars built prior to 1 Jan 1989.

Please help

.

My engine has a plate showing "Chassis no : BNR32-001455"

this does not show up in the info shown in link below.

http://forums.nicoclub.com/nissan-skyline-gt-r-r32-production-dates-t569684.html

whats going onnnnn? :(

September, 1989.

vybg.jpg

As far as I'm aware there were no R32 GTR's built before Jan 89. Mine is build number 600 and something I think and was built in August 89.

Because the R32 GTR debuted in May 1989 and production would have started from then on.

some compliance places ive called asked when was it built etc. and that some r32's wont require a compliance plate. this is why im asking.

My compliance plate has gone missing. did not notice when i purchased car. didnt cross my mind as it was registered. its been unregistered while ive been building it and not upon getting my blue slip realised its not there. zzzz

some compliance places ive called asked when was it built etc. and that some r32's wont require a compliance plate. this is why im asking.

My compliance plate has gone missing. did not notice when i purchased car. didnt cross my mind as it was registered. its been unregistered while ive been building it and not upon getting my blue slip realised its not there. zzzz

If the car was brought in under the previous 15 year old rule, it won't have a "compliance" plate. It should have a second longer VIN number stamped somewhere in the engine bay if that's the case. That's all that should be required.

some compliance places ive called asked when was it built etc. and that some r32's wont require a compliance plate. this is why im asking.

My compliance plate has gone missing. did not notice when i purchased car. didnt cross my mind as it was registered. its been unregistered while ive been building it and not upon getting my blue slip realised its not there. zzzz

If car was brought in under the previous 15 year old rule, it won't have a "compliance" plate. It should have a second longer VIN number stamped somewhere on the engine bay if that's the case. That's all that should be required.

^^ This!

They would have just needed to add a few things on to comply to the 15 Year Old Rule SEVS Law and that will pass.

When the car was complied back in the day.

If the car was brought in under the previous 15 year old rule, it won't have a "compliance" plate. It should have a second longer VIN number stamped somewhere in the engine bay if that's the case. That's all that should be required.

This may have just made my week. I have a black plate with the 17 digit vin number next to the Blue nissan manufacturers plate. I hope this is it. fingers crossed. ive just spend so much money getting the car finished if it isnt gonna be registered im gonna be spewing.

This may have just made my week. I have a black plate with the 17 digit vin number next to the Blue nissan manufacturers plate. I hope this is it. fingers crossed. ive just spend so much money getting the car finished if it isnt gonna be registered im gonna be spewing.

Don't sweat it. Should be ok.

You can also contact DOTARS if you end up needing a copy of the import approval for your vehicle, although that full VIN should do fine.

#@Anfanee how is this possible?

im slightly confused.

refer to this article.

"

The "15" Years Rule - Vehicles manufactured before 1/1/1989

The 15 Year rule was significantly altered as of 11 May 2005. Under the ammended rule if you import a vehicle which was manufactured before 1 January 1989 then it doesn't come under the SEVS ruling and does not need to be complied by a RAW. The vehicle may be imported and modified under a different set of criteria, with an engineer providing a report which demonstrates that the vehicle complies to the ADRs that were applicable at the time the vehicle was manufactured. Generally compliance for importing cars under this scheme is relatively inexpensive."

Edited by nltd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...