Jump to content
SAU Community

Recommended Posts

Is cracking of the rear subfram a common problem for our cars? Just changed the drivers side rear wheel and noticed a massive crack, just above the driveshaft. Same on the passenger side.

Has anyone had this issue, if so, how much to replace the subframe??

Trying to get a hold of the previous owner but no luck. Will be contacting the RWC workshop asap.

Link to comment
https://www.sau.com.au/forums/topic/436170-m35-cracked-rear-subframe/
Share on other sites

Dont weld it. Its the devils glue! There is nothing that sscchhdicky tape can not fix! (guido hatzis quote)

Let the baguette jokes and welding jokes begin!

Edited by Howaitonaito

Not fussed about price, the car was issued a rwc wen it clearly wasnt roadworthy. Previous owner had no idea either.

Small things werent done, cv boot and globes, was willing to let it slide because theyre easy fixes but after seeing the subframe this arvo im not even sure the workshop looked at the car.

Front pads are cactus, discs are glazed, front right cv boot is completely torn, number plate globes werent replaced AAAND the subframe is cracked.

Where do i go next? I want this all fixed, not by the workshop that issues the rwc and i dont want to pay a cent for the repairs..

Santa Claus by the sound of that. Your dreaming if you think a workshop is going to pay to do that for you.

Two options.

Weld it. The whole thing is welded together anyway.

Or

Buy one, second hand or new. Try 55400-AQ500. Sit down for the price.

It wasnt noticed. I only saw it because i had a flat in the rear. To the wheel off and its the first thing i saw.. spent all morning on the phone, just gonna swallow this bitter as f**k pill and fix it myself.

Not letting the rwc workshop touch my car again.

Trust me i spent the whole morning ringing vicroads, vacc, consumer affairs even the dodgey prick that issued the rwc. Its a shit storm waiting to happen and i really cbf dealing with it.

Its not the end of the world, swap the subframe, fix a few stupid issues get another roady bang, problem solved.

Shit happens, assholes cause it!!

But you must bring the assholes down like a bag of $hit! I wouldn't let the shop that issued the rwc get away with it. I love conflict and causing it. Bring the phucker down I say!

Oh back on to topic, get a replacement frame from Scott, I think he's swapped out quite a few so he'll be able to offer you tips and tricks too.

Its much easier said than done, if the last few years has taught me anything its that karma does catch up with you lol.. hopefuly he stubs his toe real bad!!

I love conflict to but its my car and i want it on the road asap, dealing with it like many have said isnt gonna achieve that.

Yep got onto the m35 bible with legs (scott), with any luck its sorted soon.

whats wrong with welding the cracks if its don't properly? The rest of the subframe has welds all over it!!!

I think i've had this agument before.........

+1. A quality weld job will be as good as a new one.

Any pictures of the cracks?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...