Jump to content
SAU Community

Recommended Posts

So when and how did the tranny go from driving with 1/2 the gears locked out to operating normally???

If it wasn't fixed, anyone with half a brain is going to notice it when driving it.

Something here doesn't quite smell right.

Maybe a case of sour grapes cos OP traded in thinking he had a $47k repair bill on the cards when no one would pay that to Nissan when the alternatives are so much cheaper? IDK.

Edited by turboadam
Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7150828
Share on other sites

Not too sure on the R35's, but its possible an up to date flash program by the dealer COULD have reset (temporarily) the PCM, until it sees a mechanical/electrical fault (if there was one in the first place), then it will re-learn & lock out gears as it did before.

Was the PCM flashed with the latest program during the diagnosis?

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7151471
Share on other sites

Oliver, think its great that you are trying to ensure damage transparency of your R35 to potential future owners of your car . What i don't understand is why you didn't get it repaired before trading it at the dealer, I would assume the dealer Trade-in assessment would have tanked as a result of the crook gearbox. The Repair estimates of $47 K from Nissan to repair is a joke, You can buy a Brand New Genuine Nissan Gearbox for $14K USD (Excl GST) .

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7152229
Share on other sites

To clarify.

When I was driving I heard a horrible noise coming from the transmission (almost like a grinder against metal) as I down-geared into second. I was approaching an intersection at the time. A warning came up on the dashboard display. When turned onto the busy road I found there was no acceleration. the accelerated to 40 km/h and nothing more. two cars had to take evasive action not to hit me. I was very confused and startled. I tried to drive the car again and found I only had 1st, 3rd and 5th gerars. 2nd, 4th and 6th were locked out. I connected my cobb and tried to clear the fault but it couldn't clear it, so I had the car towed home on the back of a truck and subsequently the same to Nissan.

Nissan ran diagnostics for several days, exchanging emails to and from Japan. It was ultimately decided to drop the oil and remove the valve body for inspection. when the valve body was removed a metal piece the size of a thumb dropped out. this was the tip of a gear selector fork. the valve body was put back in and the oil replaced. The fault then cleared and the car seemed to drive fine, but Nissan was insistent that transmission required a "full rebuild." These words were used on the service document, a subsequent document after the oil was replaced, another document after I asked Nissan to inspect a noise on the car and an unsolicited letter sent to my house reminding me that my car's transmission required a "full rebuild." Nissan could not even tell me which shift fork was broken as the forks were too deep in the transmission and this could only be done by sending the transmission away and stripping it apart. Even after that they they could only tell me which fork was broken, but not replace/repair the fork. Their policy apparently is only to replace and not repair anything on the GTR transmission.

When the car was traded it was traded with a condition that I would allow the Ford dealer to have the car inspected by Nissan (the same Nissan dealer that stated in no less than four documents to me that the transmission required a rebuild). I had no issue with this and full disclosure of the fault was made. As such I took an enormous cut on the trade in price. The car drove perfectly fine and If I had sold it privately a buyer would be none the wiser and they could not identify the fault without spending thousands to have the transmission stripped. However, I'm not that kind of person and as I was thinking of selling the car anyway I though it would best be handled to take the cut, let the dealership fix what's required (I was told they could do it for $30,000 with a "group discount" - The Nissan and Ford dealer operate as one company - AHG Group) and be done with it.

I became suspicious when I saw the car advertised almost a week after I traded it. What caught my attention was the statement "launch control never used" in the advertisement. I had spent 10 minutes telling the Ford manager how I had used the launch control, how it felt to use it, how fast the car accelerated with the launch control, and which buttons to push to activate the launch control. Both the GTR Service manager and engineer were also aware I had used the launch control because they asked me when I presented the car with the fault and I told them I had, but the problem did not occur during a launch control. To any potential GTR owner, the statement "launch control never used" suggests that the transmission has not been abused. In any case, this statement was deceptive because it was knowingly false and unfounded. The report from Nissan that the trade in was subject to (which I obtained after I started my inquiries) made no mention of the transmission fault. The report was provided less than 24 hours after the trade in... I have four documents from the Nissan dealer stating the the transmission requires a "full rebuild" and Ford dealer has one document from the same Nissan dealer effectively stating "The car is perfectly fine". Does that sound right?

When I confronted the general manager of the Ford dealership with respect to the advertisement and their conduct his response was initially... "What do you care anyway what we did with the car?"

So...

1. Either my car didn't need a full rebuild and this was falsely represented to me, given the Nissan dealer provided a document to the Ford dealer stating there was nothing wrong with the car (After I took a huge hit on the trade in), or

2. It did require a full rebuild and the Ford dealer falsely represented to the general public that there was nothing wrong with the car by stating "the launch control was never used" and that the car had passed a 100 point mechanical and safety inspection... knowing very well that no inspection short of stripping the transmission would detect the fault.

Put yourself in a buyer's position... would you feel ripped off? Even worse, the person who now has the car might not know any of this and may be up for a lot of money... 18K, 47K... whatever... it's not their problem to fix. People work hard for that kind of money.

Edited by Oli1710
  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7153824
Share on other sites

great that you trying to find the new owner. next time try to google the issue before talking a huge hit with trade in. even if you shipped the car to Melbourne and get racepace to repair it, would have cost a heck of a lot less..

Scenario 2 - Nissan / ford dealer sent the box to a reputable shop, got it repaid and sold it.

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7154109
Share on other sites

The fact that the Nissan dealer is directly involves makes it even more likely that they just fixed the transmission in my eyes. It gives them access to the required parts at a much reduced cost with effectively free labour, or they could even have put it through as a "goodwill" warranty claim... If they rebuilt or put a new 'box in, the "launch control not used" claim is defensible.

The response by the dealer isn't exactly a surprise either. What are they going to say... "We fixed the gearbox for a few grand and made $40k on your trade-in".

Hopefully the above is true for the sake of the new owner. :)

Out of interest, what did you trade for? An FPV GT?

Edited by BuuBox
Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7154159
Share on other sites

Reading this I assume that Nissan Japan would be extremely happy to know how one of its dealership is possibly behaving.

Nissan Australia and Ford for that matter also.

One would think Nissan Australia would know who owns the car now.

Its nice your trying to let new owner know about vehicle.

Having trouble understanding "this day in age" when no-one seems to give 2 hoots about others.

sell off what's broken and presume others won't do the same.

What if in-fact they repaired the car!.

now since the repair, the recon box hasn't had launch control used on it,

it's twisting the truth but a fact all the same.

honestly there is a lot of ways of looking at this.

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7156780
Share on other sites

I am sorry to say that Nissan Australia (let alone Nissan Japan) won't give a stuff how the dealer is behaving.

All they care about is units sold. How a dealer does that is the dealers business. I have tried making complaints to an importer (not Nissan) about a dealership before to no avail.

Edited by turboadam
Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7156888
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 2 months later...

Is the R35 is ADM GTR? Still under warranty at that time?

I think a lot of people have bad experience regarding car service and trade-in matters in most OZ car dealers. I experienced once the Toyotx manager lie for promises of work which not made and arrogantly accuse we are not reasonable! After numerous complaints and with friends (working in Toyotx) help to get the evidence and legal letter to scare him off! And at the end he just come to the office and said OK I was wrong! But no sorry have said! And end the matter! Because, the working environment protects people (workers) more than customers! That's why they don't afraid of loosing their job and no need to improve customer's relation!

I would have said if their working attitude and arrogant manner found in any car dealers in Hong Kong and Japan! They would have lost their job long ago!

But if I were the Black GTR owner I may have paid extra but not AUD$47,000.00 to buy and replace a new GR6 gearbox directly order from Japan and carry out installation by a well known garage mechanic and not money ripped off service centre! This may save more money than trade-in!

When I brought my R35! The owner said due to the GR6 gearbox may or will be DEAD in the coming years and he willing to deduct a sum of AUD$8,000.00 about half the price of a new GR6 gearbox as a sinking fund for my future replacement of new gearbox!

Getting a well know good and experience mechanic in hand first is the most important factor to be consider before buy any expensive cars! I have a Q7 3.0TDI and the car have problem, then I took it to a good mechanic garage for repair, he charged me AUD120.00 fixing the problem regarding the diesel fuel pump system broken down! The solution is to buy a new small capacitor replace by soldering works! And he give me a quote from Aud1 that replacement of the diesel system require AUD$6,500.00 excluding labour! So you know the big difference!

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7252623
Share on other sites

  • 2 weeks later...

Update: To date I have found that the GTR was sold in NSW. The number plate was changed to: CMJ78H. If you own a black R35 GTR in NSW with registration plates CMJ-78H or you know the person that does, feel free to get in touch with me. I have documented evidence to prove that two dealerships (both members of the same dealership group) collaborated to cover up critical mechanical damage to the transmission to sell the car for market value without repairing the damage. I also have some other interesting history about the car that you may have been lied to about... As I was... (0467555220 - Oli)

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7263928
Share on other sites

I confronted the general manager of the dealership group about it and the Nissan dealership in question. Both went on the defensive. The general manager stated; "it's not misleading or deceptive conduct because we sold it to a wholesaler in NSW."

Is that comfort to the person who now owns it or any consumer that deals with scum that think like that? He missed the finer detail of the law... It's not my place to give legal advice here.

Link to comment
https://www.sau.com.au/forums/topic/436589-gtr-scam/page/2/#findComment-7264851
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
×
×
  • Create New...