Jump to content
SAU Community

Recommended Posts

Hey guys, threw a rod on my skyline and am in the process of a rebuild. I'm going for stock internals at this stage due to the fact I'll probably sell it for a gtr upgrade in 6 months or so when I have the money. The question I've come here to ask is, what is a safe amount of power to run through stock internals with my following mods, I really don't want to push it to it's limits, although would love to be able to make some decent power without worrying about something going bang again. If someone can help me out a bit, it would be much appreciated!

Specs are as follows

- Gtx3582r turbo, mild Steele exhaust manifold, all custom alloy piping, HDI intercooler, Greddy intake manifold with 90mm throttle body, Bosch 1000cc injectors, split fire coil packs, turbo smart 45mm hypergate wastegate, turbo smart supersonic bov, m spec alloy radiator, Apexi power FC ecu with z32 Afm and hand controller, full 3 inch turbo back exhaust with dcat, walbro 500kw fuel pump, twin place ceramic clutch. And it's a series 2, 33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/436889-r33-gtst-rebuild/
Share on other sites

If you're going to sell it in six months why take a risk? Sell off all the gear you mentioned and return it to stock - you'll probably make more money that way and less chance of blowing it up.

  • Like 1

Thanks for the replies so far. At this stage, still unsure whether I want to keep it or not. Will be finding out how much it is to go down the forged track, but if its ridiculous amounts of money, I dont think its worth it unless im aiming for big power. The question is, provided the engine has a fresh rebuild, would it be able to safely handle 270-280rwkw? Thats as far as I really want to go, power wise. I bought the car for 7 grand, so I dont mind spending a bit of cash to make it reliable, so maybe forged is a good option?

Thanks for the replies so far. At this stage, still unsure whether I want to keep it or not. Will be finding out how much it is to go down the forged track, but if its ridiculous amounts of money, I dont think its worth it unless im aiming for big power. The question is, provided the engine has a fresh rebuild, would it be able to safely handle 270-280rwkw? Thats as far as I really want to go, power wise. I bought the car for 7 grand, so I dont mind spending a bit of cash to make it reliable, so maybe forged is a good option?

bit off topic but why the gtx3582 if your going for sub 300kw? or did it come with the car? Maybe try selling that off and getting something like gt/gtx 3071 will be much better to drive at that power level. That powerlevel a good stock 2nd hand motor that hasnt been rebuilt will do it no worries so a fresh one definately no problem aslong assuming things like your tune and maintance is kept up.

Hey, yeah the 3582 come with the car. And thanks, that's definitely something to consider. I've got a pair of tomei 256 poncams here to put in her aswell. With the fresh rebuild I was going to run 300+ but just unsure on how reliable that is, even with a good tune and maintenance kept up to date, I've heard many stories of idiots blowing their engines... But I kept in mind these are guys that thrash their cars redlining flat every gear. I only really drive this car on the weekend. The guy that had it before me thrashed it a bit by the looks of things, so just trying to do things right this time. I would love to go forged for that extra security and peace of mind. So nothing's set in concrete here, just need some help on what path is the wisest to go down. Thanks for the info so far.

Yeah what you say makes complete sense. I'm a little undecided whether to keep it or not. So what I'm saying is if I do rebuild it, I will probably end up keeping it for a good couple years. The main question is, what power can I aim for with stock internals that's going to be reliable? With the mods I have I can easily achieve 320+ But is that real smart?

I think its been said on this forum many times that a std rebuild engine is not always as reliable as a std factory built engine, and there are lots of people running 280-350rwkw on std engines, for how long is down to tune and maintenance and how you treat it

Went and talked to my mechanic today, who's a good friend of the family. The damage done to the block is somewhat repairable but he has also given me the advice many others on here have, and that's to just drop another rb25 in. His already found me an engine for $600 and it's in really good condition, don't ask me how he pulled that one off, because I thought they go for around $1200. His advised me that if I'm going to keep the car, to get a set of forged pistons and rods, head gasket. But also as many of you said, if I'm going to sell, drop the engine in, a tune and sell her off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...