Jump to content
SAU Community

Recommended Posts

Hey Johnny how did you go with the barbagallo membership and cams licence situation? Can you confirm what the go is between the 2 types of track day?
Also keen to hear how you and you're automobile are going on the track too ;-)

Anyone else coming out tomorrow?

I'm all geared up and ready to go - will be there from start to finish (9 - 4ish) if all goes well.

Hey Brendan,

Yeah all good - wasnt denied entry and that event requires CAMs license

As what bryce has said, i believe the 2 types of track days are to separate the track cars (unregoed - quick lap times) vs street cars (regoed)

Other than a slight high water temp which was expected in the hot weather, everything went fine, oil temp was lower than what i expected considering i didn't have an oil cooler

Bryce was there was well and he was having water temp issues too

Hope you have fun tomorrow as forecast doesnt seem as hot as what we had on Wed

  • Like 1

Yeah I do :) how funny :) wat is it my clone?? Wat colour was the r33?

So many similarities it's not funny

What wheels do you run?

He tows his r33 there, white gtst with gtr wing, car spits flames (like your dp), runs xxr wheels

Hey Brendan,

Yeah all good - wasnt denied entry and that event requires CAMs license

As what bryce has said, i believe the 2 types of track days are to separate the track cars (unregoed - quick lap times) vs street cars (regoed)

Other than a slight high water temp which was expected in the hot weather, everything went fine, oil temp was lower than what i expected considering i didn't have an oil cooler

Bryce was there was well and he was having water temp issues too

Hope you have fun tomorrow as forecast doesnt seem as hot as what we had on Wed

So just back on the topic of memberships - if we want to do the Tuning Days, I'm assuming we require the L2 Membership (Racing General Membership)?

Where did you guys see that it was cheaper than last year? I had that membership last year but looks as though its still $285 on the website?

  • Like 1

Hey fellas

First off; the white R33 you guys are talking about is Laurence. He is a champ so make yourselves known to him next time and tell him I pointed you in his direction ;-) He usually runs between 3 cars with his brother - they also have a couple of Ford escorts that they bring out. He's been doing tuning days since way back when us Blake boys started a few years ago and drives very well. He just doesn't poor the money in for big hp ... yet haha

I was a bloody happy man to be out on track on the Friday again. The blue monster was insane and I managed to get some good track time in during the morning sessions before a broken brake rotor stopped my day short. For those interested in watching a vid, you can hear me putting down a few hard laps via my youtube channel ... Type in "SCR34MER444" and select the video Barbagallo Tuning Day 21/02/2014

If you listen carefully, you can actually clearly hear my R34 around the entire track from pit lane ;-)

There's still a few more changes I wanted to make with the oil system before I'll be comfortable with the reliability of the new RB25/30 so that will put me out of action again for a month or 2 but looking forward to being back out there again ASAP.

For those interested, I have also finally resolved the confusing membership level topic with Barbagallo management so please quote the below for anyone else with questions and hopefully this clears things up a bit;

  • Regardless of whether you are going to do "Your car our track" days or "race tuning days", you must have a CAMS Level 2 Speed licence
  • You can basically choose which membership and track day type you want to do for the year (one or the other)
  • The "your car our track" day (requires Level 4 WASCC membership) is for those who are either new to the track and/or are not running confident, consistent lap times like the race series drivers.
  • The "race tuning day" (requires level 2 WASCC membership) is mainly for CAMS log-booked race cars AND for street registered cars with confident drivers who are not going to get in the way of any race series competitors who are testing/practising
  • As a general rule of thumb, I would say if you have past track experience and know the track protocol well (i.e. what all the track safety lights mean, let quicker cars through and keep out of the way when necessary, entering and leaving pit lane correctly etc), then you should be doing "race tuning days" and not "your car our track" days. For example, if it's the first time you have been on the track and you are driving a stock standard Suzuki Swift then you should definitely get a L4 WASCC membership and only do "your car our track"
  • However, don't let the above put you off getting a WASCC L2 membership and joining us on the race tuning days just because your car might not be making big hp with big brakes etc. Obviously there are going to be various cars doing various lap times no matter what track day you are doing. It's all just about having the confidence and awareness of quicker cars that are out there with you so that we aren't getting in the way of others too much or causing a safety hazard.
  • Depending on the turn out for the "race tuning days", the 20 minute sessions are split in to 3 categories - "CAMS log-booked race cars", "open wheelers", and "Street registered cars"
  • My old man and I have both signed up L2 membership and will be doing "race tuning days" this year, and I would encourage most of the guys who I have met on here to be doing the same to get the best track time 'bang for your buck'.
  • For more info, visit www.wascc.com.au and check out the membership page or contact the race office during the weekly office hours on 9306 8022

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...