Jump to content
SAU Community

Recommended Posts

Hi ladies and Gents,

I am looking for a keen fabricator that wants to showcase his skills in a pretty rare opurtunity to make a 350GT / 350Z turbo kit, there is not much involved and there is none in Austrlaia,

I am familiar with mechanical engineering and have a few options in mind (i have done my homework)

I own the car so thats not an issue

I just need someone with nice welding skills that is willing to showcase some of his work in a first australian kit,

Cantact me if you are interested

I already have a kit, currently on my Stagea, but I am willing to sell it as the auto can't handle what I would like to throw at it. 400kw capable GTX3076, 1.06 Tial rear, 45mm external gate.

What are your power requirements and where are you located? I can custom make kits (if the car is here) I can also supply turbo manifolds separately if you require them...

there is not much involved and there is none in Austrlaia,

There is more involved in a turbo kit than you think, as there is bugger all space to work with.

post-63525-0-77470600-1389579622_thumb.jpg

Perhaps Dale.

I don't work well with mechanical engineering types for some reason, they usually have no idea how to make things in the real world and underestimate costs, fabrication time and demand for the product, which might be the case here. There is absolutely no point fabricating manifolds when Nissan already made some, as HKS found.

I suggest you stick the turbo in the boot ff_Driftz, much more room there... :P

Perhaps Dale.

I don't work well with mechanical engineering types for some reason, they usually have no idea how to make things in the real world and underestimate costs, fabrication time and demand for the product, which might be the case here. There is absolutely no point fabricating manifolds when Nissan already made some, as HKS found.

I suggest you stick the turbo in the boot ff_Driftz, much more room there... :P

What are you talking about Scotty, He said " there is not much involved and there is none in Austrlaia"?

I'd like to know more about this mythical land named "Austrlaia" where the inhabitants have no access to 350GT/350Z turbo kits, it sounds like a terrible place.

But that's just me.

would it not be cheaper & easier to just buy an entire kit?

http://gtmotorsports.com/product.php?productid=17255&cat=258&page=9

they even cater for RHS drive vehicles, cast manifolds too.. no cracking!

Cheaper? No way, I could fabricate a kit for less using factory VQ25det manifolds. I did notice there was 1 HKS kit in stock though...

Easier? I doubt it, most twin setups or kits that put the turbo in the stock airbox position will just get you defected. There is no point doing any of the above until the engine is built anyway.

Gents,

I am not asking anyone to work for free,

it always suprises me that there is negative people out there who should welcome new ideas for everyones benefit including their own,

if i wanted just a turbo kit i could fabricate one myself in one day without a problem, I want to put together something new with VGT turbos etc etc

that a person with very limited hands on skills can fit, I can design, I can weld, I can machine etc but in saying that - am i an expert welder/tuner etc?

the answer is no there is individuals on here that are and i invite those individuals to come forward and showcase their skills with a turbo kit that i will help design (that is my Job and i am an expert in mechanical design that is what i do every day, 3D modeling, FEA and so on)

PS: when i say there is none in Australia, I have done my home work, and if any of you think there is - i chalange you to find me a kit that uses VGT turbos in an efective manner with little mods on a 350/V35.

So you want a variable geometry turbo on 3500cc car? Is this a purely design project?

Point is, you want to turbo a v35 there are good kits out there that will do the job and no be laggy.

If you want to make a design project, then choose a car with better packaging options like an inline motor that can take more than 10psi of boost.

1. So you want a variable geometry turbo on 3500cc car? Is this a purely design project?

2. Point is, you want to turbo a v35 there are good kits out there that will do the job and no be laggy.

3.If you want to make a design project, then choose a car with better packaging options like an inline motor that can take more than 10psi of boost.

1. Yes

2. Not the type i want there is not, if you can find me a kit with VGT i am happy to consider it

3. You should ask yourself what limits an internal combustion piston engines pressure capability?

All in all I ask for a Fabricator if you are not interested please do not post

In my opinion a variable geometry turbo kit is unnecessary due to the large displacement of your engine, the VQ35 will spin up a massive turbo very early in the rev range and allow more flow than the stock motor could ever ingest.

Check out the new BW range, early spool from the Ti wheel and flow like nothing else for their size. No other moving parts to fail and free flowing large split housings to lower manifold pressure and heat. Unfortunately they won't fit in the confines of the V35 engine bay.

1. Yes

2. Not the type i want there is not, if you can find me a kit with VGT i am happy to consider it

3. You should ask yourself what limits an internal combustion piston engines pressure capability?

All in all I ask for a Fabricator if you are not interested please do not post

Pull your head in mate. I'm interested in trying to find a solution to your pipe dream. Your talking with Scotty, who if there isn't something he doesn't know about vq turbos, it's not worth knowing, and I myself have done a VQ35 turbo into an awd stagea.

The turbo is only a small part of an overall kit, so why not consider using the pipe work and other parts. What turbo are you intending to put on it? Single or twins? Gt30, 35, 42? Re you going to buy an off the shelf item, or modify it yourself? That constricts the location and packaging.

Are you building a motor? The stock vq35 has notable flaws when using forced induction. But I'm sure you can engineer your way around that...

Pull your head in mate. I'm interested in trying to find a solution to your pipe dream. Your talking with Scotty, who if there isn't something he doesn't know about vq turbos, it's not worth knowing, and I myself have done a VQ35 turbo into an awd stagea.

The turbo is only a small part of an overall kit, so why not consider using the pipe work and other parts. What turbo are you intending to put on it? Single or twins? Gt30, 35, 42? Re you going to buy an off the shelf item, or modify it yourself? That constricts the location and packaging.

Are you building a motor? The stock vq35 has notable flaws when using forced induction. But I'm sure you can engineer your way around that...

engg.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...