Jump to content
SAU Community

Recommended Posts

Awesome cruise guys! Had heaps of fun and the Mrs loved going thru the nasho at high speed,

we had a really good pace thru first part. Good drive. Met new people and good food!

Great day!

oh and the guy in RBE-45T your car was popping some awesome flames.

so i managed to save almost all the photo's. I only resized the raw files for now, ill go through and crop / adjust sometime in the future.

for now, 90 odd photos are being uploaded here http://iblott.com/gallery/

*I have no drama's giving away larger versions, i made them 800 just cause i didn't want to wait for massive uploads. let me know what ones you might want.

  • Like 1

You legend! There are some fantastic shots you have there mate. PM sent regarding hi-res copies :)

All you photographers should now get on a FB page ASAP. These pics need to be shared around :)

And you guys who've not driven Macquarie Pass and Jamberoo Mtn Rd before, what's your rating or comments?

Mac Pass UP = ...../10

Mac Pass DOWN = ...../10

Jamberoo Mtn UP = ...../10 (if you've done it)

Jamberoo Mtn DOWN = ...../10 (if you've done it)

Suggestions...

* Dawn run?

* Night run?

* Up Jamberoo Mtn Rd?

* Up Kangaroo Valley Rd?

* Combo?

so i managed to save almost all the photo's. I only resized the raw files for now, ill go through and crop / adjust sometime in the future.

for now, 90 odd photos are being uploaded here http://iblott.com/gallery/

*I have no drama's giving away larger versions, i made them 800 just cause i didn't want to wait for massive uploads. let me know what ones you might want.

Nice shots bro

Would have been there Terry, had I known it was a Mac Pass cruise.

Must have missed something in the posts because I assumed it was going to be just a straight drive from Liverpool to Bowral via the Highway?

Oh well... another time.

Would have been there Terry, had I known it was a Mac Pass cruise.

Must have missed something in the posts because I assumed it was going to be just a straight drive from Liverpool to Bowral via the Highway?

Oh well... another time.

it was i think..

then me and terry said lets do mac pass... so SAU took over :)

Would have been there Terry, had I known it was a Mac Pass cruise.

Must have missed something in the posts because I assumed it was going to be just a straight drive from Liverpool to Bowral via the Highway?

Oh well... another time.

+1 :)

so i managed to save almost all the photo's. I only resized the raw files for now, ill go through and crop / adjust sometime in the future.

for now, 90 odd photos are being uploaded here http://iblott.com/gallery/

*I have no drama's giving away larger versions, i made them 800 just cause i didn't want to wait for massive uploads. let me know what ones you might want.

great shots Ian!

Can i have the larger version of this one please "Canon EOS 60D695"

Thanks :)




  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...