Jump to content
SAU Community

Recommended Posts

Hey guys quick question for ya'll.

Just traded my n/a S13 for an R32 Gtst a month or two back. Sweet ride dope deal on my end only downfall is its auto, gotta change dat shit! Pretty stock, wider wheels, fmic, blow off etc.

Anyway I have noticed I have really bad understeer when driving in the wet. I literally have to slow down to 20km/h to get around a roundabout without the front wheels locking up on me. Its realy wierd since the first thing that kicked out in the s13 was the rear haha. In the dry its fine.. Anyways just wondering if anyone may have an answer for me or something of use i could do.

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/439078-severe-understeer/
Share on other sites

thats odd - try tyres and alignment for sure - last track day i had - my rear end went out, shifting from 4th to third- soon as the clutch came out bam so did the rear end -

hope you fix it - bugger if i would be driving it in the wet if its that bad

I used to own a 4WS Prelude daily and in the wet it couldn't follow a Vectra around a simple corner.

Damn Nankangs needed changing despite 70%

Yeah, cheap tyres, including a lot of the chinese stuff (ling long, nankang etc) are horrible even with tread.

OP check out what tyres you have, and what pressure they're running and post back.

I use to have some no brand chinese tyres on the old XR6's rear, 1 drop of rain and i could have walked faster around a roundabout without getting some serious drift angle happening, it was so bad that i stopped the family driving it till i changed them.

There would be no g force through the car sideways, you would swear it would have been impossible to get a car sliding at those slow speeds, yet going around at a stupidly slow speed yet the rear would just break out in a blink of a eye.....

Dont buy no name chines tyres, tyre shops are selling them everwhere, they are death traps.

Makes me wonder how many people have been booked under the hoon laws with them or wraped the car around a pole and been told by the police they were driving like idiots and charged.

I can see how that goes down with a cop who just pulled you over for sideways action.

"I swear sir its these new nangkangs, says the guy who bashed limiter at full lock"

Nah but seriously. shit tyres are shit

Even the khumo ku31 on my pulsar had zero wet traction with 50% tread

  • Like 1

Cheers for the replies guys appreciate it. Checked the front tyres, a brand called kinforrest? Never heard of it so I'm assuming they're rubbish and I'll replace them as soon as possible. Approx 60 % worn with more wear on the inside. Will ask my mechanic friend to take a good look at it once new tyres and wheel balance and alignment has been done.

Kinforest are terrible.

i had bald rears on the XR6T and brand new (2000km old) kinforest on the front.

in the wet i could turn the wheel, step hard on the throttle and the rear still had more grip and the car would go straight.

i didn't even bother to wear them out, at 3000km old i left them at a Bob Jane, told them to do what they want with them, except resell them.

change tyres, under steer be gone!

Cheers for the replies guys appreciate it. Checked the front tyres, a brand called kinforrest? Never heard of it so I'm assuming they're rubbish and I'll replace them as soon as possible. Approx 60 % worn with more wear on the inside. Will ask my mechanic friend to take a good look at it once new tyres and wheel balance and alignment has been done.

Sounds like you should check your control arms and bushings if there is uneven wear. No point prematurely wearing through new tyres before its fixed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...