Jump to content
SAU Community

Recommended Posts

Hey guys quick question for ya'll.

Just traded my n/a S13 for an R32 Gtst a month or two back. Sweet ride dope deal on my end only downfall is its auto, gotta change dat shit! Pretty stock, wider wheels, fmic, blow off etc.

Anyway I have noticed I have really bad understeer when driving in the wet. I literally have to slow down to 20km/h to get around a roundabout without the front wheels locking up on me. Its realy wierd since the first thing that kicked out in the s13 was the rear haha. In the dry its fine.. Anyways just wondering if anyone may have an answer for me or something of use i could do.

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/439078-severe-understeer/
Share on other sites

thats odd - try tyres and alignment for sure - last track day i had - my rear end went out, shifting from 4th to third- soon as the clutch came out bam so did the rear end -

hope you fix it - bugger if i would be driving it in the wet if its that bad

I used to own a 4WS Prelude daily and in the wet it couldn't follow a Vectra around a simple corner.

Damn Nankangs needed changing despite 70%

Yeah, cheap tyres, including a lot of the chinese stuff (ling long, nankang etc) are horrible even with tread.

OP check out what tyres you have, and what pressure they're running and post back.

I use to have some no brand chinese tyres on the old XR6's rear, 1 drop of rain and i could have walked faster around a roundabout without getting some serious drift angle happening, it was so bad that i stopped the family driving it till i changed them.

There would be no g force through the car sideways, you would swear it would have been impossible to get a car sliding at those slow speeds, yet going around at a stupidly slow speed yet the rear would just break out in a blink of a eye.....

Dont buy no name chines tyres, tyre shops are selling them everwhere, they are death traps.

Makes me wonder how many people have been booked under the hoon laws with them or wraped the car around a pole and been told by the police they were driving like idiots and charged.

I can see how that goes down with a cop who just pulled you over for sideways action.

"I swear sir its these new nangkangs, says the guy who bashed limiter at full lock"

Nah but seriously. shit tyres are shit

Even the khumo ku31 on my pulsar had zero wet traction with 50% tread

  • Like 1

Cheers for the replies guys appreciate it. Checked the front tyres, a brand called kinforrest? Never heard of it so I'm assuming they're rubbish and I'll replace them as soon as possible. Approx 60 % worn with more wear on the inside. Will ask my mechanic friend to take a good look at it once new tyres and wheel balance and alignment has been done.

Kinforest are terrible.

i had bald rears on the XR6T and brand new (2000km old) kinforest on the front.

in the wet i could turn the wheel, step hard on the throttle and the rear still had more grip and the car would go straight.

i didn't even bother to wear them out, at 3000km old i left them at a Bob Jane, told them to do what they want with them, except resell them.

change tyres, under steer be gone!

Cheers for the replies guys appreciate it. Checked the front tyres, a brand called kinforrest? Never heard of it so I'm assuming they're rubbish and I'll replace them as soon as possible. Approx 60 % worn with more wear on the inside. Will ask my mechanic friend to take a good look at it once new tyres and wheel balance and alignment has been done.

Sounds like you should check your control arms and bushings if there is uneven wear. No point prematurely wearing through new tyres before its fixed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bah! I can't see the point in custom number plates at all. I went to the rego office, fished through a box of "premium" plates (the ones that had the "not as tall" option for the front plate) and picked the one that had a 32 in it. That's the limit of the effort and cost I will put into number plates. The only plate that I'd consider paying for would be 2332, but that's not possible here because it already exists from probably 90 years ago, and it would cost a fortune to obtain it, if it were available.
    • After chasing my tail with LS results..... and cheaper than a turbo swap... How confident are you that the dyno is accurate relative to other results? How fast is the car - What MPH does it actually run? Is this similar to what people running this power would expect?
    • Hi mate I am having an identical issue with my 98 R34 GTT. The engie suddenly cuts out under load at about 3-4k, black smoke out exhaust. Almost feels like traction control kicking in. No CEL but still going to check codes later today. Car was sitting in the shed for about 5 months before hand and only idled a few times, took her out with about 1/4 tank, filled up and thats when the issues started happening.  Threw on a spare set of coils/harness and checked plugs which was no help. Recently had fuel pump/filter changed so surely thats not the issue unless condensation in fuel, I just havent had the time to drain it It's running a hi flow turbo, bosch 1000cc injectors, walbro 450L, Z32, Nistune etc... All about 2000km old.
    • I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
×
×
  • Create New...