Jump to content
SAU Community

Recommended Posts

cheers Jas...

i know Stao has been making Highflow EVO turbos as well...maybe its an option

what about this?

http://shopping.kinugawaturbo.com/kinugawaturbohyundaigenesistd05h16g300ps-4-3-1-1.aspx

or

http://shopping.kinugawaturbo.com/kinugawaturbohyundaigenesistd05h16g300ps-4-3-1.aspx

whats the difference is between 10.5 and 11.5 trim I assume the 11.5 is a bigger exhaust housing.. looking at the reverse scroll of the evo housing itwould make for much more effective fitment

is turbine housing going to flow a 2.5lt though?

basically my old turbo with a twin scroll rear....lol

or this big huffer for the lols.... :D

http://shopping.kinugawaturbo.com/kinugawa4turbochargergt3582withar117twinentrydividedt4housing600p.aspx

Garret have a great range for the GT30's now, here are a few new external ones I saw recently... Do it Artz.

yeah I saw those...this plus GTX turbos with twin 40mm gates could be good....getting pricey though and you know I'm a poor kent..

the evo turbo looks like my best option for what i want so far...

10.5T and 11.5T refer to the cm2 area of the turbine housing.

For reference a 12cm2 is roughly .82, so the 11.5 should be nice on your JZ with a healthy turbine.

The 10.5 is what is used OEM in evo's 5, 6, 8MR and 9. All other twin scroll models use a 9cm2 (9T)

My emo7 had a 10.5, unless it had been changed at some stage? I doubt it, as the car was stock as a rock.

Had been changed.

Unless its an RS, then absolutely everything about the car was an option.

10.5T and 11.5T refer to the cm2 area of the turbine housing.

For reference a 12cm2 is roughly .82, so the 11.5 should be nice on your JZ with a healthy turbine.

The 10.5 is what is used OEM in evo's 5, 6, 8MR and 9. All other twin scroll models use a 9cm2 (9T) Evo 4s had a 9T while 7s and 8s a 9.8T

just need to fix my own post, realised i had a memory lapse.

Evo 4 was the first one with the engine turned around and a reverse rotation twin scroll turbine housing , they used the smallest or 9 cm housing . 5 had from memory an optional 10.5 for the RS can't remember other variants . AFAIK 6s all used the 10.5cm housing even the TMEs with the smaller 15GK compressor wheel . The larger and heavier Cedia based 7and some 8s used a slightly smaller 9.8cm turbine house to get back some of the squirt the 4g63T lost with tightening emissions legislation in 2001 . From memory 8MRs had the 10.5 standard as did most 9s which all had inlet VCT to pull the bottom end up .

There are aftermarket 11.5 housings which works well on std turbos with exhaust upgrades . The 8s and 9 had a revised version of the 10.5cm turbine housing using a single flap and mirror imaged D shaped outlets like the TSIW EFR housings . The early ones had two holes and two flaps and most have probably cracked now anyway .

So the story goes the Evo turbos were the closest production turbos got to being a true competition unit especially the small comp wheel types for restricted rally engines anyway . Not exactly a TR30R but I don't think any other manufacturer got as close - for Grp A rally anyway .

One 7 I know of goes pretty well with an 11.5 housing on a bog stock turbo . On a 9 spec turbo with the larger comp housing and diffuser it should have gone better . The best overall was supposed to be the second series 9RS turbos with the Titanium Aluminide turbine and the super back or tulip shaped if you like magnesium compressor wheel . The early version had a flat backed comp wheel and these can lunch themselves if leaned on too hard .

The TiAL turbine is said to be boost limited and if you overdo it the wheel separates from the shaft destroying itself . These 9RS turbos are supposed to boost 3-500 revs sooner than a conventional 9 units and its possible the 11.5cm turbine housing puts that back near standard but with less exhaust restriction .

A .

Buy the EFR!

My 8374 .92a/r is the best engine part I've ever bought!

Fantastic response, great top end power, big torque curve.......and more response than the dyno plots show by far.

  • Like 1

Buy the EFR!

My 8374 .92a/r is the best engine part I've ever bought!

Fantastic response, great top end power, big torque curve.......and more response than the dyno plots show by far.

have you fixed your boost creep issue with the internal wastegate ?

haha bolt on kit...nice!....still not twin scroll though and not sure i like the design of that manifold..def seems to work though..

anyway have found hiflow ct12s for around 1500, good for 300kws...so have given up on the twin scroll idea, still think it could work well though..

I'm just going to flog the stockies till they blow or I tire of them :P

don't mess around with the Evo turbo chargers. It will simply choke your engine. The turbine housings are too small.

Just grab yourself an EFR turbocharger, and live with amazing boost response, and fantastic power.

I don't think you realise how little a true twin scroll actually improves response compared to a single Artz. Some think it is the same as simply running a smaller housing. I can't say I have tried one myself, but it's a lot of work for little gain...

There would be more response gain going to an EFR Ti wheel turbo imo.

yep.. so use the Efr turbo with twin scroll, its not going to be any worse is it....!

how could it not work... What about Owen...did the twin scroll gtx3076...you telling me that didn't work?..problem.with the smaller housing is you are sacrificing top end, while a twin scroll while you can have you cake and eat it too...

And making a twin scroll manifold is no harder than making the manifold in that eBay advert...it would just merge a little differently into a t3 or t4 twin flange instead of merging into single pipe

Its not alot of extra work at all..

Anyway dont worry, im not building it so you won't have to make me any whacky manifolds...was just an idea, I still think it's a good one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...