Jump to content
SAU Community

Recommended Posts

i meant dirty broad minded person,bad afternoon,do tell.

I know you meant dirty slart ;) It's the forum profanity filter.

Long story short, installed an oil cooler, thread out of the filter stud under pressure and promptly emptied 5L of 10 tenths in my engine bay in the middle of the main road on a blind corner. Had to tow the bitch backwards back to the old mans and I managed to fix the plate with a different filter and put some shit oil in for now.

I know you meant dirty slart ;) It's the forum profanity filter.

Long story short, installed an oil cooler, thread out of the filter stud under pressure and promptly emptied 5L of 10 tenths in my engine bay in the middle of the main road on a blind corner. Had to tow the bitch backwards back to the old mans and I managed to fix the plate with a different filter and put some shit oil in for now.

Sucks bollocks bro.

I know you meant dirty slart ;) It's the forum profanity filter.

Long story short, installed an oil cooler, thread out of the filter stud under pressure and promptly emptied 5L of 10 tenths in my engine bay in the middle of the main road on a blind corner. Had to tow the bitch backwards back to the old mans and I managed to fix the plate with a different filter and put some shit oil in for now.

so in other words the SS came all over the road after being f**ked sideways

Hopefully she's recovered and ready for another poun.....round tomorrow morning?

She always gets f**ked, she must have been horny as shie because I barley touched her fun pedal before she squirted everywhere.

I must have a chat with Connie to see if this is true

So i havnt paid via bank deposit, ive been away for work. can i please jsut pay cash tomorrow? i hadnt worred as previosuly ive paid on the day.

Sorry if this is an issue.

Dan

Cash on the day is fine. Would be preferred if you brought the exact change.

Hope to see you out there!

sure was,pity the time went by soooo fast,was just getting into it,chopped a few evos as well so alls well in the world again,lol,bring on the north cruise now,that should be good also.Good to see a large turnout,first time that there were more 32s than 33s,finally you guys got your 32s out of the sheds,thought i was going to be the only one again.Whats better than chopping an evo?.Chopping more evos,lol,but seriously great to see all the evo guys turning up and supporting the sau club,let us know when we can run with you guys because chopping is quite addictive,lol,go the SKYLINES. :action-smiley-069: chop,chop,chop

  • Like 1

Lol - it was great fun.

Thanks to the execs for making this happen

It was good to have such a great turn out and let's hope we can repeat that next time too.

Big thanx to the evo guys as well, it sure works well to have you there as well

Looking forward to more happy laps

Did anyone have any photos btw - I couldn't take any for once lol

  • Like 1

hopefully more sau guys turn up next time,not that the evo guys arent good to run with but we need to represent better,no good having a skyline if you dont drive it,i like the attitude of the evo boys,they will turn up no matter what,would like to run with them at one of there events in the future,always goood to see how the otherside operates.i only wish i could get the car out more often,but am trying to do as many events this year as i can,so i hope you guys dont get sick of seeing me everywhere,lol.

  • Like 1

yeah good event guys, alot of fun... few minor hiccups, (my immobiliser crapped itself when enterign the track :( haha) and the intercooler hose, but alls well that ends well.

Seriously though, lakeside for next happy laps?? way better then QR imo

thanks for organising the event guys, and thanks to the evos for coming out and having a run, and a special thankyou to Greg for letitng me borrow your tools; i wouldsta been up the proverbial otherwise.

  • Like 1

It was my first run on lakeside but i have to say i really enjoyed the run,would be better if we could get to run longer,thats my only complaint,i like how they dont enforce the speed rule tooo much,i was going a little over the speed limit,all ill say is that the standard speedo runs out pretty fast around lakeside.Like to thanks mike and the team for organising another great morning,and all the guys from sau and evo club for turning up,looking forward to the next one.Are there any other tracks around that we can run on or is it just qr and lakeside?

  • Like 1

Are there any other tracks around that we can run on or is it just qr and lakeside?

It's pretty much QR and lakeside for happy laps. Morgan Park raceway runs under the CAMS banner and CAMS will never allow happy laps and Norwell driving centre last i heard was having more issues with noise complaints than Lakeside, i'm not even sure if it's still open.

I might even drive next happy laps... Maybe... Will see ?

Zane is more than welcome to jump in my car again :nyaanyaa:

It's pretty much QR and lakeside for happy laps. Morgan Park raceway runs under the CAMS banner and CAMS will never allow happy laps and Norwell driving centre last i heard was having more issues with noise complaints than Lakeside, i'm not even sure if it's still open.

This unfortunately. We are lucky happy laps are still running as all it will take is a few crashed or a serious injury and the insurance will bo too much for QR to justify without dramatically raising the prices.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...