Jump to content
SAU Community

Recommended Posts

i meant dirty broad minded person,bad afternoon,do tell.

I know you meant dirty slart ;) It's the forum profanity filter.

Long story short, installed an oil cooler, thread out of the filter stud under pressure and promptly emptied 5L of 10 tenths in my engine bay in the middle of the main road on a blind corner. Had to tow the bitch backwards back to the old mans and I managed to fix the plate with a different filter and put some shit oil in for now.

I know you meant dirty slart ;) It's the forum profanity filter.

Long story short, installed an oil cooler, thread out of the filter stud under pressure and promptly emptied 5L of 10 tenths in my engine bay in the middle of the main road on a blind corner. Had to tow the bitch backwards back to the old mans and I managed to fix the plate with a different filter and put some shit oil in for now.

Sucks bollocks bro.

I know you meant dirty slart ;) It's the forum profanity filter.

Long story short, installed an oil cooler, thread out of the filter stud under pressure and promptly emptied 5L of 10 tenths in my engine bay in the middle of the main road on a blind corner. Had to tow the bitch backwards back to the old mans and I managed to fix the plate with a different filter and put some shit oil in for now.

so in other words the SS came all over the road after being f**ked sideways

Hopefully she's recovered and ready for another poun.....round tomorrow morning?

She always gets f**ked, she must have been horny as shie because I barley touched her fun pedal before she squirted everywhere.

I must have a chat with Connie to see if this is true

So i havnt paid via bank deposit, ive been away for work. can i please jsut pay cash tomorrow? i hadnt worred as previosuly ive paid on the day.

Sorry if this is an issue.

Dan

Cash on the day is fine. Would be preferred if you brought the exact change.

Hope to see you out there!

sure was,pity the time went by soooo fast,was just getting into it,chopped a few evos as well so alls well in the world again,lol,bring on the north cruise now,that should be good also.Good to see a large turnout,first time that there were more 32s than 33s,finally you guys got your 32s out of the sheds,thought i was going to be the only one again.Whats better than chopping an evo?.Chopping more evos,lol,but seriously great to see all the evo guys turning up and supporting the sau club,let us know when we can run with you guys because chopping is quite addictive,lol,go the SKYLINES. :action-smiley-069: chop,chop,chop

  • Like 1

Lol - it was great fun.

Thanks to the execs for making this happen

It was good to have such a great turn out and let's hope we can repeat that next time too.

Big thanx to the evo guys as well, it sure works well to have you there as well

Looking forward to more happy laps

Did anyone have any photos btw - I couldn't take any for once lol

  • Like 1

hopefully more sau guys turn up next time,not that the evo guys arent good to run with but we need to represent better,no good having a skyline if you dont drive it,i like the attitude of the evo boys,they will turn up no matter what,would like to run with them at one of there events in the future,always goood to see how the otherside operates.i only wish i could get the car out more often,but am trying to do as many events this year as i can,so i hope you guys dont get sick of seeing me everywhere,lol.

  • Like 1

yeah good event guys, alot of fun... few minor hiccups, (my immobiliser crapped itself when enterign the track :( haha) and the intercooler hose, but alls well that ends well.

Seriously though, lakeside for next happy laps?? way better then QR imo

thanks for organising the event guys, and thanks to the evos for coming out and having a run, and a special thankyou to Greg for letitng me borrow your tools; i wouldsta been up the proverbial otherwise.

  • Like 1

It was my first run on lakeside but i have to say i really enjoyed the run,would be better if we could get to run longer,thats my only complaint,i like how they dont enforce the speed rule tooo much,i was going a little over the speed limit,all ill say is that the standard speedo runs out pretty fast around lakeside.Like to thanks mike and the team for organising another great morning,and all the guys from sau and evo club for turning up,looking forward to the next one.Are there any other tracks around that we can run on or is it just qr and lakeside?

  • Like 1

Are there any other tracks around that we can run on or is it just qr and lakeside?

It's pretty much QR and lakeside for happy laps. Morgan Park raceway runs under the CAMS banner and CAMS will never allow happy laps and Norwell driving centre last i heard was having more issues with noise complaints than Lakeside, i'm not even sure if it's still open.

I might even drive next happy laps... Maybe... Will see ?

Zane is more than welcome to jump in my car again :nyaanyaa:

It's pretty much QR and lakeside for happy laps. Morgan Park raceway runs under the CAMS banner and CAMS will never allow happy laps and Norwell driving centre last i heard was having more issues with noise complaints than Lakeside, i'm not even sure if it's still open.

This unfortunately. We are lucky happy laps are still running as all it will take is a few crashed or a serious injury and the insurance will bo too much for QR to justify without dramatically raising the prices.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...